I do it all spring until the trees stop dropping stuff...About now (after Mem. Day) I'll put it on the clock. In the fall, just as I'm getting ready to close, I run 24/7 again.
I do it all spring until the trees stop dropping stuff...About now (after Mem. Day) I'll put it on the clock. In the fall, just as I'm getting ready to close, I run 24/7 again.
Carl
I'm a stingy SOB when it comes to utilities and don't want to pay the electric companies any more than necessary. I run mine as little as necessary and that may be a few hours a day as long as the pool stays clean. It (pool) doesn't get much use. My thoughts are to run the pump/filter as little as necessary to keep the pool clean. Each pool is different so you have to experiment as to how much time and when works for you. If you have solar heating then it changes the equation. Run for maximum heating.
Just my simple opinion.
Al
running the pump doesn't really use a lot of electricity, make sure you have a 220v circuit and the longer that u run it the better. You will actually waste more on chemicals trying to get it rebalanced and cleaned up due to lack of circuluation
I run mine about 8 hours a day in the summer. I split it up into a 5 hour block during the heat of day so my heat pump works at peak efficiency and then a 3 hour block in the evening when I am home and most likely to use the pool during the week. This allows my water to turn over a couple of times and gives my SWG plenty of time to maintain my chlorine levels. In the winter I run it long enough to keep the pool at temperature and adjust the SWG accordingly to keep the chlorine levels correct. Keeping the solar cover on the pool it is usually about 6 hours a day, once again split into two blocks.
Retired pool store and commercial pool maintenance guy.
Greg, I don't know where you get this nonsense. Basic electricity: I = E / R and Watts = Volts * Amps. You can run a smaller pump a lot longer to get one change over of your water but STILL burn far less elec than a larger pump. Anyone with a pool can SEE the change in electric bills and not running your pump more than is necessary will fix that. That's what timers are for. It comes down to GPM and how much elec it takes the pump to achieve that.Originally Posted by gregugadawg
Usually, 220v appliances are more efficient than 110 ones--that's true. And, of course, it's true that keeping your water healthy is cheaper and easier than curing a sick pool.
Last edited by CarlD; 05-30-2006 at 11:48 PM.
Carl
Carl, once again your explanations are right on the money! BRAVO!![]()
Retired pool store and commercial pool maintenance guy.
I have a 23,000 gallon IG that I have a timer on. Run first segment 10:00am - 1:00pm and the second 3:00pm - 6:00pm. Keeps the pool clean and chemicals at the right level. Seems to me 24/7 is just a waste of electricity.
This is what works for me anyway.
Bookmarks