+ Reply to Thread
Results 1 to 10 of 16

Thread: I just need to know it will be OK!!

Hybrid View

  1. #1
    no1ford is offline ** No working email address ** Thread Analyst no1ford 0
    Join Date
    May 2006
    Posts
    75

    Default I just need to know it will be OK!!

    Hi- I am new here and I have a 18x 48 intex metal sided pool. Within two days of setting it up it turned a shade of green. I went to the pool store and they told me I had algea, to put two gallons of liquid chlorine in and keep the levels high for 2 days or so and it should filter through. My water is super clear, but green and there is no visible algea or dirt in the pool. Does it usually take longer than two days to clear up? It is sort of a lime green tint now. It just feels like nothing is changing.

  2. #2
    no1ford is offline ** No working email address ** Thread Analyst no1ford 0
    Join Date
    May 2006
    Posts
    75

    Default Re: I just need to know it will be OK!!

    Please,anyone ever had this happen?

  3. #3
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: I just need to know it will be OK!!

    Do you have any metal in your water? You will have to post numbers of chorine, combined chlorine, ph, alkalinity, calcium and cya, then we can help you better. If the chlorine didn't kill all the algae your water could be slightly green. Lime green could be that your pool got stained from the high chlorine precipitating metal out of the water onto the pool. Drop your water level slightly and see if the pool is a little yellow, yellow and blue make green. Don't worry - it can be cleared up.
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  4. #4
    no1ford is offline ** No working email address ** Thread Analyst no1ford 0
    Join Date
    May 2006
    Posts
    75

    Default Re: I just need to know it will be OK!!

    How do I test for metal?

    FC-10 +
    Ph-7.8
    Alk-120
    Cya-30-50

    Thank you for the response!!! I really appreciate it!

    Jen

  5. #5
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,009

    Default Re: I just need to know it will be OK!!

    You don't have to test for metals, just lower your water about 1" and see if the sides of the pool are a little yellow, or if you have white steps, they will be a little yellow. If you have stain, then there are metals in the water. You say you have chlorine 10+, what kind of test do you have?. With cya 30 - 50 you have to bring your ph up to 15ppms and keep it there to kill algae. You have to keep it consistantly at 15 - letting it go up and down will make the process last longer. You should test 3x a day and bring the chlorine right back up to 15ppms. Your ph is a little high, you can bring it down to 7.4 with a little muriatic acid or ph down. Keep your filter running 24/7. You only need bleach to kill an algae bloom - lots of bleach and perserverance! Brush and vacuum the pool everyday, and backwash the filter. Algae can take a while to clear up if your chlorine isn't staying high enough for long enough. By the way, welcome to the forum!
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  6. #6
    Join Date
    Dec 1969
    Location
    Berkeley Springs, WV
    Posts
    30

    Default Re: I just need to know it will be OK!!

    ""Does it usually take longer than two days to clear up?"

    YES, mine took 4 days.

    JD

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts