Reply With QuoteYes, it is called a seal and sits on the motor shaft between the impeller and motor mounting plate. They are fairly easy to replace and are often the problem of a leaky motor.
Small leak at pump / motor
I've got a small leak where the pump and the motor join. I've tightened all the bolts but there is still a drip. Id there a gasket between the motor and pump that may need replaced?
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Re: Small leak at pump / motor
Yes, it is called a seal and sits on the motor shaft between the impeller and motor mounting plate. They are fairly easy to replace and are often the problem of a leaky motor.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Posting Permissions
Bookmarks