+ Reply to Thread
Results 1 to 3 of 3

Thread: How Much FC To Make Water Potable?

  1. #1
    Join Date
    May 2012
    Location
    Florida
    Posts
    38

    Default How Much FC To Make Water Potable?

    i figured this was a good place to discuss this with some of you guys/gals who know WAY more about chlorine than i do.

    a handfull of times a year go camping and hiking. as you can imagine a full pack of gear gets heavy when you carry everything you need for a few days. while i do take water with me im limited to how much due to space and weight. sometimes i will hike 4 plus miles into the woods and im often forced to drink water from some very questionable sources like this.







    i know that these watering holes are not only used by me, but they are also a source of water for all the critters in the woods. there is no question that there are all kinds of crap in these holes like animal feces/urine, baceria, virus, cyst, etc...

    i currently use a mechanical filter that will filter down to .3 micron. the filter also has activated charcoal inside to help with filtering. once my water bladders and bottles are filled i follow up with a chemical treatment. ive used a two tablet treatment that uses 1 tablet of iodine and one tablet of another chemical to get ride of the iodine taste. they seem to work as i have not gotten sick, but i have read that iodine will not get rid of crypto. there is also almost an hour wait time for the chemicals to do their thing.

    a while back ( before learning a little about chlorine ) i purchased a very expensive 2 ounce bottle with a chemical in it that was supposed to be good at killing the nasties... turns out that very expensive chemical is nothing more than 3.5% sodium hpochlorite! i found this out as i was checking the bottle for an upcoming trip as i remember it having an experation date on it. i kicked myself in the butt after realizing that i spent 15.00 on 2 ounces of bleach!the other 96.5% in the bottle must be made up of fairy dust and unicorn blood... i guess thats why i cost's so much!

    the instructions say to use 5 drops per liter of water ( the water should be as clean as possible ), mix and wait for 10 minutes before drinking. i wanted to test this to see how much FC the 5 drops will give in 1 liter but its old and im sure its not a full 3.5% sodium hpochlorite any more. my plan is to fill my 2 ounce bottle ( which is about identicle to the taylor bottles ) with fresh bleach which is 8.25% and use it on some of this dirty water to see what kind of FC levels i get from a certain amount of drops.

    so here is my question. what is my target FC for making water safe to drink? i know other things will effect my FC like how much critter poop is in the water, but will water temp and PH play a role in any of this? also, what FC levels are safe for drinking?

    there are other chemical treatments like chlorine dioxide tablets, and from what i have read they are better than iodine and chlorine for killing nasties, but these tablets have a 4 hour wait time before drinking so i have not used these yet.

    here are pics of my filter in case anyone was wonder anything about that...





    18' round 7.5K gal AG vinyl pool; bleach; waterway cartridge filter; waterway pump; 12hrs; taylor k-2005 and taylor k-1515a; utility water ; summer: none; winter: none; ; PF:16

  2. #2
    chem geek is offline PF Supporter Whibble Konker chem geek 4 stars chem geek 4 stars chem geek 4 stars chem geek 4 stars
    Join Date
    Nov 2004
    Location
    California
    Age
    65
    Posts
    2,226

    Default Re: How Much FC To Make Water Potable?

    Since you are concerned about Crypto, you don't want to use chlorine since that will take too long to inactivate it. I suggest you take a look at Katadyn Micropur MP1 Purification Tablets that are a combination of sodium chlorite and Dichlor that when dissolved in water will generate chlorine dioxide that will kill Crypto though it takes 30 minutes in clear water and 4 hours in cold and extremely dirty water. Everything but Crypto is killed within 15 minutes.
    15.5'x32' rectangle 16K gal IG concrete pool; 12.5% chlorinating liquid by hand; Jandy CL340 cartridge filter; Pentair Intelliflo VF pump; 8hrs; Taylor K-2006 and TFTestkits TF-100; utility water; summer: automatic; winter: automatic; ; PF:7.5

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: How Much FC To Make Water Potable?

    Thanks for taking this one, Richard!

+ Reply to Thread

Similar Threads

  1. dpt powder doesn't make water turn pink
    By marciastz in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 06-13-2009, 01:12 PM
  2. Make sure I have this right - TA and CH
    By Trimom in forum Dealing with Alkalinity and Calcium
    Replies: 0
    Last Post: 06-19-2007, 04:37 PM
  3. Tiny microbubbles make water look cloudy
    By cygnusecks in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 08-31-2006, 09:16 PM
  4. Make sure I got this right...
    By steveinaz in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 08-04-2006, 02:52 PM
  5. NEWBIE - How to make fresh water ready to swim?
    By bluenote in forum Using Chlorine and Chlorinating Chemicals
    Replies: 11
    Last Post: 05-12-2006, 06:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts