Aqualink heater control

[JDWalker]

I have an Aqualink RS with a Laars LX400 heater ~ 7 years old. Spa temp set for 104. Turned the sysem on and it heated to 94 and stayed there. Temp sensor seemed to work correctly., to test I disconnected the water temp sensor so it measured air temp, which it did acccurately. I expected the heater to just keep running but it got to 98 and cycled there and wouldn't go higher.

[aylad]

Hi, and welcome to the forum!

Unfortunately, most folks have shut their pools down for the winter, so forum traffic has slowed way down--I don't know how long you might go before you get any helpful replies. Have you tried calling the customer service number in the manual for your unit?

[JDWalker]

Janet,
I have not but I guess that's my next step.
Jerry