+ Reply to Thread
Results 1 to 4 of 4

Thread: replace or repair damaged pump motor

Hybrid View

  1. #1
    Join Date
    May 2012
    Location
    Phoenix, AZ
    Posts
    14

    Default replace or repair damaged pump motor

    My Hayward (A.O. Smith) pump motor fail due to my stupidity. Too much debris in the pump strainer.

    I opened the back, and could see the plastic case for the capacitor is melted. Is it worth trying to have it repaired, or attempting to replace the capacitor? Or should I just buy a new motor?

    It's a single-speed 2HP motor, about 7 years old.

    Thanks,

    hikernut

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: replace or repair damaged pump motor

    Poconos is good on motors.
    Carl

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: replace or repair damaged pump motor

    Hikernut,
    Have you resolved the problem? If not, I can shoot Poconos an email and have him check in here to give you some advice--he's the best one around when it comes to motor repair...

  4. #4
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: replace or repair damaged pump motor

    Replacing the capacitor is fairly easy and cheap to do so I would try that before scraping the motor.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

+ Reply to Thread

Similar Threads

  1. Replace motor or pump and motor?
    By myLABSpool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-25-2013, 01:13 PM
  2. Pump Motor: Repair or Replace?
    By CarlD in forum Pool Equipment & Operations
    Replies: 9
    Last Post: 05-14-2013, 06:50 PM
  3. Replace motor or motor& pump?
    By jtcaputo in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 09-08-2012, 07:27 PM
  4. Pump started screeching - repair or replace?
    By aquarium in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 10-29-2006, 09:45 AM
  5. What do I replace along with the pump motor?
    By deanbrew in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-09-2006, 11:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts