Poconos is good on motors.
My Hayward (A.O. Smith) pump motor fail due to my stupidity. Too much debris in the pump strainer.
I opened the back, and could see the plastic case for the capacitor is melted. Is it worth trying to have it repaired, or attempting to replace the capacitor? Or should I just buy a new motor?
It's a single-speed 2HP motor, about 7 years old.
Thanks,
hikernut
Poconos is good on motors.
Carl
Hikernut,
Have you resolved the problem? If not, I can shoot Poconos an email and have him check in here to give you some advice--he's the best one around when it comes to motor repair...
Replacing the capacitor is fairly easy and cheap to do so I would try that before scraping the motor.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Bookmarks