Hey -

I have a new AquaTrol Return Jet Mount SWG.



For some reason, the Inspect Cell Light comes on and the unit never seems to generate chlorine.

Here's a photo of the unit and my setup:





One thing that I find odd, is that the instructions reference plugging in the pump into the SWG unit itself, yet this is the bottom:



The phone jack is for the flow switch, which is not installed with the Return Jet setup. Currently I'm just running my pump/filter all the time until I get this up and running.

The diagnostic numbers are as follows:

1) Pool Temp: 77
2) Cell Voltage: 32.9 (22-26 is when chlorine is generating, 30-35V is when it's not)
3) Cell Current: 0.00 (2.5-4 is when chlorine is generating, 0 is when it's not)
4) Desired Output %: 100
5) Instant Salinity: 0 ppm
6) Product Name: AL - 7 (AL-7 Means AquaTrol Return Jet)
7) Software Revision: r.145

A few nights ago I added 5 21 KG bags of salt to my 15x30 AGP and disolved it.

The vendor is closed (long weekend) so I was hoping to get some ideas before Tuesday.

Thanks!
Brad