Laars Hot Shot Pool Heater?

[Mr.Mooks]

Thanks for your replie kelemvor. I have checked into the conversion and it can be done but the parts cost $850.00. What I realy need to find out is what it is currently set to use propanr or has it been converted already natural gas. Either way I don't care because I can use either LP or Natural Gas but I need to know which it is now. Any easy way to check?

[Charlie_R]

Given your description of the heater on propane, my guess would be that the heater is set to NG. Your flame should be only 1.5 - 2 inches long, and be blue with a slight yellow tip.

Assuming a multiple burner set, you might check the tubes to ensure they are clear. But usually, if the tubes have anything in them, the flame would be small, and weak. Correct me if I'm wrong, but I'll bet the flame you had sounded loud. Roaring even. That tells me that the orifice was too large for the type of gas. Was the pilot flame also long and more yellow than blue, with a noticeable space between the flame and the tube? I'd bet it was.

[Mr.Mooks]

To Charlie R. The burner flame was louder than I would think it should be. Weird thing is the pilot was a perfect blue colour. Mabey a little space but I have never seen it operate properly so have nothing to compare it to. That is what also has me puzzeled!! It is a multiple burner set. Thx for your input!