I have a 20' x 40' IG vinyl pool with 4'x8' polymer steps. I have notice a loss of water which has recently gotten worse. Today I valved my pump so that it would pull water out from the dry well under my pool and go to waste. The water was nice and warm so I was in the pool while it was doing this. I noticed a slurping sound by the steps and discovered that it was pulling water and air in from where the metal strip is between where the liner ends and the stairs start. This strip holds the liner to the wall and has stainless screws about every one inch all the way down to the bottom of the pool. Obviously something has gone wrong here and it is leaking. The question is how do I go about fixing this? Is there some sort of caulking I can apply under water or does the pool have to be drained to fix this?
Bookmarks