Hopefully this is my final set of questions. The stains remain gone, but the water is cloudy. I've been running the pool 24 hours/day with the SWG running. I had a separate issue this week with pressure rising quickly in the pump so I had to backwash a couuple of times and clean the filter manually. I got that cleaned yesterday (Thurs) a.m., but ran w/o DE in the filter until last night b/c I ran out. Also yesterday a.m. I turned the SWG up b/c I wasn't getting any chlorine readings. I ran it at 100 all day, then checked again after about 10 hours but the chlorine still barely registered. I put the control on "boost" overnight, and the level raised slightly. I tested the water this a.m and got the following:

FC = .5
TC = 2
ph = 7.2 (I did add a little acid last night as it had crept up to just above 7.4)
alk = 70
cal = 180
cya = 27
temp = 80

We're having a small cookout tomorrow (6 kids, 4 adults) and a bigger party on Tuesday (6 kids, 9 adults) and I'd like to have the water cleared up ASAP. Do I just need to keep running the pump with the SWG on "boost" to raise the chlorine to clear the water? Can/should I add a chlorine stick in the skimmer to accelerate the process? Also, are CYA and Alk too low?