The stain treatment worked like a charm, but I have a follow up question.

I added the acid (1.5 lbs for a 22k pool) and sequestering agent on Sunday afternoon and let the filter run as described. I checked the ph last night (Monday) and it was steady at 7.2. I'm in Northern Virginia and it has been raining a couple of inches a day for a few few days so I'm not sure if the rain water helped raise the ph, but I did not have to add anything to raise it.

I checked the pool again this morning. The ph remained at 7.2 and the the chlorine was 0 (as expected), but the water is very cloudy and the pump pressure is very high (baseline is around 20 but pump is currently at 35). I couldn't backwash before work this a.m. and didn't want to run the pump all day with the pressure that high so I turned the pump off until I can backwash today after work. Is there anything about the stain treatment and sequestering agent that would affect the pressure in the filter that much? Also, with the cloudiness of the water, am I safe to re-start my SWG and to start raising the chorline level?