+ Reply to Thread
Results 1 to 4 of 4

Thread: Ultra -Flow Pump

  1. #1
    Join Date
    Aug 2012
    Location
    New Jersey
    Posts
    4

    Default Ultra -Flow Pump

    Hi,
    I am in the process of changing the impeller on the ultra flow, after figuring out how to remove the old impeller I noticed the new one did not cover the front of the motor shaft and there is a threaded insert on the shaft for a bolt/screw to keep the impeller from coming loose. My question is Does anyone know what the bolt/screw size is, and is it a reverse thread? The impeller screws onto the shaft normally.

    Thanks in advance for any input!

    Wayne

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Ultra -Flow Pump

    Membership upgraded; thread moved so you can post.

    PICTURES! Take pictures of your pump - even in pieces -- and we can probably tell. Post the pics with Picasa, Flickr, Webshots or Photobucket. You can also email them to me at poolforum@gmail.com, and I'll post them -- but it want be before Thursday.

  3. #3
    Join Date
    Aug 2012
    Location
    New Jersey
    Posts
    4

    Default Re: Ultra -Flow Pump

    Thanks PoolDoc,
    The old impeller didn't have a screw but was solid and it covered the screw hole. So I just installed the new impeller the same way, the rotation keeps the impeller tight so there wouln't be a need for that screw. Thanks again.
    Wayne

  4. #4
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Ultra -Flow Pump

    If it works . . . it works!

    Ben

+ Reply to Thread

Similar Threads

  1. 2HP Ultra Flow Pump Titan SS DE Filter
    By fasttruck9 in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 08-24-2012, 10:47 PM
  2. No flow to booster pump
    By mjcogan in forum Pool Cleaning: Manual or Automatic
    Replies: 2
    Last Post: 03-21-2012, 09:27 PM
  3. Low flow on pump...
    By cruzmisl in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-19-2006, 08:18 AM
  4. No water flow at pump
    By vinouspleasure in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 06-12-2006, 01:24 PM
  5. No water flow at pump
    By vinouspleasure in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 2
    Last Post: 06-11-2006, 07:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts