Looks like your getting there! Nice looking pool, I'm sure you will be enjoying it soon.
Looks like your getting there! Nice looking pool, I'm sure you will be enjoying it soon.
15' x 48" round 4.4K gal Intex AG pool; Unicel Type C-5315 cartridge filter; Intex 633T pump; (24/7) Taylor 2006 kit; utility water; summer: ; winter: ; iPhone; PF:27
Thanks RedwingT, Spensar.
Today was not as hot as usual, and seems as though the chlorine is holding a bit. I checked the level in the morning and the my HTH kit showed orangish brown color. And retested in the evening and its holding at 6ppm.
I added 5.65 Gal more today. Pool is definitely getting better, but need to hold it there..Picture taken this evening.
![]()
18x32 kidney 15K gal IG Gunite pool; skimmer tabs; Hayward DE6000 DE filter; Hayward/AO Smith Superflow 1 speed pump; 12 hrs; heat pump, fountain or waterfall; Taylor K2006C ; utility water; summer: none; winter: none; android tablet; PF:8
With a DE filter, that should clean up very quickly if you run your pump 24/7.
Yes, running the pump 24/7.
Still the water is very cloudy (I can not see the bottom and not much of the side), pH is 7.2 but Cl is 1ppm. I guess I need to add more bleach in the evening. Still waiting for the test kit to arrive.
Here is the pic taken today morning
![]()
18x32 kidney 15K gal IG Gunite pool; skimmer tabs; Hayward DE6000 DE filter; Hayward/AO Smith Superflow 1 speed pump; 12 hrs; heat pump, fountain or waterfall; Taylor K2006C ; utility water; summer: none; winter: none; android tablet; PF:8
If the chlorine reading is correct, then you really need to add some more bleach. With chlorine levels that low, the algae will come right back and with a vengance. Hard to know what your levels should be at until that test kit comes in and we can get some reliable test results but one thing I do know is if your chlorine is only at 1 you will most likely still be growing algae.
30' round 22K gal AG vinyl pool; skimmer tabs and GV Bleach; Hayward SD60 sand filter; Pentair 1.5 HP pump; hrs; ; utility water; summer: none; winter: none; K-2006 Test Kit ; PF:5.5
Ditto, better more chlorine than less. I opened greener than you were and kept 20 ppm+ for 4 days to kill the algae dead. You don't want to let the chlorine level get below what the pros here recommended, until the water is clear.
Likely best to not use the floater for now. The pucks you use increases the stabilizer/CYA level.
I am not quite sure if all the Alage is gone. Pool is blue, but not clear. Still I can not see the bottom (just the two steps and 2 feet on the side walls) .
I can see that when I test at night, Cl is mostly orange or brownish orange with HTH kit. By morning its 5ppm. So probably I am loosing more than 1 ppm overnight.
As Ben suggested I been adding bleach since 12th. My bleach addition history so far..
8/12/2012 - 8.52 Gal
8/13/2012 - 14.2
8/14/2012 - 8.52
8/15/2012 - 5.68
8/16/2012 - 5.68
8/17/2012 - 5.68
8/18/2012 - 2.84
8/19/2012 - 4.26
Do I need to keep adding at this level or can I cut back a bit now?
And my Taylor 2006c kit is expected to come by Tuesday. So just a day more before I can get the actual Cl levels.
18x32 kidney 15K gal IG Gunite pool; skimmer tabs; Hayward DE6000 DE filter; Hayward/AO Smith Superflow 1 speed pump; 12 hrs; heat pump, fountain or waterfall; Taylor K2006C ; utility water; summer: none; winter: none; android tablet; PF:8
Bookmarks