Quote Originally Posted by tdoss View Post
I added six (6) more jugs (96oz each) of bleach. It does not say the percentage anywhere on this bottle (which is one reason why I listed what type I was using just in case I'm not using the correct type).
Was this Walmart bleach? Bleach with no listed % is probably VERY low. You might want to check the label again -- I'm not sure if genuine bleach can be sold without a %; Walmart Great Value bleach is listed at 6%


I'm still confused by step #9. In my test kit, it says to mix sample and R0013 together for 30 seconds and then pour into the small tube until the dot just disappears. I can absolutely drop, drip by drip, counting and then multiplying however the math seems off to me. The reason being...in my little tube...the less mixture I use to make the dot disappear, the higher the number line on the side of the tube. The more of the solution I add...the lower the number. It starts at 100 and the lines steadily go UP the tube until it reaches 30 near the top.

If I add drops...counting and then multiplying by 3...then the more I add...obviously, the higher my result will be. That seems completely converse to what my kit does...or am I completely misunderstanding this kit?
The CYA test is NOT a drop count!

Watch the Taylor videos from this page: http://www.poolforum.com/pf2/showthread.php?17157