HELP PLEASE...I am going insane lol

[tazt60968]

Well I think we are good to go...I have been watching and the liner does not seem to be pulling down anymore...I have the pool about 1/3 full and the liner is still away from the wall but doesnt seem to be slipping down anymore, I am assuming that it is just pushing the liner against the wall and stretching, I decided to put the uprights and rails on and pray it doesnt move anymore. THANKS for all the advise Dennis!!!! Keeping fingers crossed but looks like I made it! lol Thanks Again!
Glenn
PS If I knew about the other method I would have tryed it but because I am on a well and I had that much already in the pool, I decided it would be best to keep going and see what would happen, but I think that your method would have been a great idea right from the get go! Thanks Again!!!

I have been trying to install a new liner, with many of the same problems you've had..only with one extra problem (believe it or not, you didn't get to enjoy ALL of the headaches you could have..lol) I somehow managed to get my post out of alignment (okay, so I hit one with the tractor) and now i can't get my top rails to line up properly...Is there any hope for me?

[gonza2788]

Please help I have the same problem---kinda
I prepared my 18x33x52
AG pool according to the instructions from the manufacturer. I had an overlap of about 5 inches (not the 6-8 the manual said). When the first water tank of water came with 6, ooo gallons I took off the coving in some sections that seemed to have wrinkles. The liner instructions said to do this. About 3/4 of the 6, 000 gallons was in when the round sides of my liner started pulling in and popping the coving off and the walls began to buckle on those sides. Now there is barely 3 inches overlap on one side and about 8 inches on the other and the liner is completely off on the rounded sides. I had not put in the uprights and top rail yet. Should have I done this? Is it possible that the liner is too short? What can I do?

[hoffmans]

I saw a picture Dennis posted for someone who was having liner problems. The picuter shows a pool with the line streched over it for filling.
If I can find this old post I will link you guys to it.
Gonza and Taxt maybe you should start your own threads asking for help.
Good luck all!

[hrsdennis]

Hi, that post is in this thread

http://www.poolforum.com/pf2/showthr...5743#post15743

There is more info about that on the first page of this thread.

More detailed questions really should start a new thread.

Best of luck, Dennis