+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: taylor test kit and borax

  1. #1
    Join Date
    Jul 2012
    Location
    Louisiana
    Posts
    20

    Default taylor test kit and borax

    I need to raise the ph in my pool- taylor test kit only provides info for raising with soda ash and I want to use Borax- how much to use? Do I measure it as I would the soda ash? 18,000 gal outdoor in ground gunnite...

  2. #2
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: taylor test kit and borax

    How far do you need to raise the pH? What is your TA? What form of chlorine are you using?
    Janet

  3. #3
    Join Date
    Jul 2012
    Location
    Louisiana
    Posts
    20

    Default Re: taylor test kit and borax

    TA is 130, so I was gonna lower it w muriatic acid. My ph is right on target, and I'm sure the acid will lower the ph as well, so I want to be prepared. Using swcg and last time i shocked with cal hypo was one week ago.

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: taylor test kit and borax

    You said in post #1 that you needed to raise your pH but then in post #3 you state that pH is right on target.

  5. #5
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: taylor test kit and borax

    shawnw wants to be prepared to raise Ph once it drops after adding acid to lower TA.........have I got that right, shawnw?
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  6. #6
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: taylor test kit and borax

    The process for lowering TA involves raising pH by aeration. Chemically adjusting pH with borax will bring TA back to where it was.

  7. #7
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    70
    Posts
    3,743

    Default Re: taylor test kit and borax

    To substitute borax (decahydrate form) for the soda ash when using the Taylor base demand test use twice the amount of borax by weight then the amount of soda ash called for.
    The decahydrate form of borax is commonly sold as 20 Mule Team Borax.

    HOWEVER, this is only for raising pH when the TA is good and you don't want it to rise any higher and is not part of the TA lowering process, which involves dropping the pH to a safe level (7.0), aerating to bring the pH back up and repeating this process. When you add acid to lower TA you will also lower the pH by converting bicarbonate into carbonic acid (operative word here is acid). Carbonic acid, for our purposes is just carbon dioxide dissolved in the water (think club soda or seltzer). If we areate the water to drive out the CO2 (think shaking the bottle of club soda to make it go flat) we have lowered the amount of carbonic acid (operative word is acid) and the pH goes up. However, the carbonic acid is not converted back into bicarbonate but has been removed from the water so the TA does not climb. Once the pH has risen you can add more acid to lower the TA and pH again and repeat this process until the TA is where you want it.
    Retired pool store and commercial pool maintenance guy.

  8. #8
    Join Date
    Jul 2012
    Location
    Louisiana
    Posts
    20

    Default Re: taylor test kit and borax

    JimK, you are correct. BigDave, please enlighten me...I am obviously still learning! What exactly do I need to do to lower the TA if not muriatic acid? I definitely do not want to start a vicious cycle btw the TA and ph!

  9. #9
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: taylor test kit and borax

    My apologies, Shawn; you had 3 posts in moderation, and some how I lost 2 of them, trying to combine them.

  10. #10
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    70
    Posts
    3,743

    Default Re: taylor test kit and borax

    Lowering TA is a process and here it is in a nutshell:
    1. Test TA and pH
    2. Drop pH to 7.0 and not lower (lower can damage pools and equipment) It does not matter if you walk or slug the acid, it will have exactly the same effect. The act of adding the acid and dropping the pH is what lowers TA.
    3. The trick now is to bring the pH back up without raiseing the TA. We do this by letting the CO2 created when we added the acid outgas. To speek this up we aerate the water any way we can.
    4. When the pH is above 7.4 to 7.6 we test TA again and if it is still now low enough we repeat this process from step 2. When the TA is at target we stop and just aerate to bring the pH back up.
    Here are full instructions:
    http://www.poolforum.com/pf2/showthr...-HOWTO-amp-FAQ

    If you are comfortable with handling Muriatic acid then the acid demand test will be helpful in getting the pH down to 7.0 quickly without overshooting.

    The only time you get into a vicious cycle with TA and pH is when you try and follow a pool store's bad advice of putting a whole lot of acid in at once, usually by sligging it in the deep end with the pump off (which tends to drop the pH dangerously low and damage pool surfaces) and then trying to bring the pH back up with a chemical, which raises the TA back to where it was when you started or worse if you use pH up (sodium carbonate) which will actually cause the TA to go higher than when you started!
    Retired pool store and commercial pool maintenance guy.

+ Reply to Thread

Similar Threads

  1. Using the new Taylor test kit?
    By Budlight592 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 07-24-2012, 11:14 PM
  2. My first test with my new Taylor Kit!!!
    By 392papa in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 07-18-2012, 08:04 AM
  3. Using my new Taylor test kit...HELP!
    By sabres07 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-13-2012, 11:02 PM
  4. Taylor FAS-DPD Test Help
    By buki5 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 06-15-2010, 11:24 PM
  5. PH test with Taylor 2006k test kit
    By hancop in forum Testing and Adjusting Pool Water Chemistry
    Replies: 1
    Last Post: 06-03-2008, 01:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts