+ Reply to Thread
Results 1 to 10 of 13

Thread: New AGP Install

Hybrid View

  1. #1
    Join Date
    Jul 2012
    Location
    Ontario, Canada
    Posts
    45

    Default New AGP Install

    Placement, that tree and it's roots are long gone now:



    The reason I bought the pool was so I could rent a bobcat Had to get the smallest one possible to fit through my gate.



    Moved a little bit more:



    Waiting for my wife to get me the rest! More to follow

  2. #2
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: New AGP Install

    Are you having fun yet?

  3. #3
    Join Date
    Jul 2012
    Location
    Ontario, Canada
    Posts
    45

    Default Re: New AGP Install

    Ya! Except for when the rental place came to pick up his Bobcat

  4. #4
    Join Date
    Jul 2012
    Location
    Ontario, Canada
    Posts
    45

    Default Re: New AGP Install

    Last sand truck leaving, thank goodness!



    Getting ready to start the leveling, still some extra dirt kicking around. Didn't want to go too deep with the bobcat:



    First circle leveled, bubble is inbetween the lines the whole way around:



    Second circle started, but it was 35C outside (95F) so I decided to stop. Almost done this circle:



    Now to finish the second and third circles, then to make sure there are no gaps underneath the 2x4.

  5. #5
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: New AGP Install

    Deja vue! I would swear that's my in-laws' street in London!

    That's a lot of work on a very hot day.
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  6. #6
    Join Date
    Jul 2012
    Location
    Ontario, Canada
    Posts
    45

    Default Re: New AGP Install

    My pool getting filled by mother nature before I had a chance to install my pool



    Doing the final level, I must have checked it a hundred times between the level and transit:



    The outside done with crusher dust:



    The amount of nuts and bolts just for the side support system:



    And finally one side completed:


+ Reply to Thread

Similar Threads

  1. Above ground install tip
    By Newman1415 in forum Above-Ground Pool Construction & Repair
    Replies: 5
    Last Post: 06-19-2013, 03:21 PM
  2. liner install help?
    By jazzbone in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 05-16-2010, 06:55 PM
  3. Liner Install
    By mohawk in forum Above-Ground Pool Construction & Repair
    Replies: 8
    Last Post: 06-13-2009, 11:27 PM
  4. Should I install SWG myself???
    By Plane_guy in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-29-2006, 12:17 PM
  5. Question About AG Install
    By glepage in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 06-07-2006, 06:53 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts