Hello to all and thanks in advanced for your help. Me and my family are finaly getting our new pool installed next week. A 24' x 15' x 52" AG with a Hayward cartridge filter and vinyl liner. I have a well and will need a truck for the water. The truck is 6,000 gallons and I will fill the remander from our well. Slowly! OK lots of options from this point on so I want to do it RIGHT!
I have been reading through the forums and I think I am at the right place for help. BBB seams the way to go. Will I need to add stablizer from the start and what levels should I bring the chlorine to? Must I shock first or just start adjusting the levels? Of course my next stop is to order the test kit from the site. I'm I right that without pucks its easier to maintane ph and alkalinity and have lower cya levels? What are my step? Any help is greatly appreciated. Thanks again in advance. John