Ground Preparation/Tree Removal

[dis_250]

Thanks for replays.

The hole is in the middle of round section. It will be under the linear.
I was also told to use crushed limestone and to put some sand on the top of it.

I don't want to be surprised once when the pool is full of water.

[MaxxFusion]

In the middle. Thats perfect. I would just fill and pack with sand.

[JJ in Tx]

tamp the sand or what ever you use down tightly.
Like maxx said "layers", if you do it a bit at a time it will compact easier and better than if you fill the whole hole and try to do it.
JJ

[hrsdennis]

Hi, It's been all good advice so far. The key is to water and pack several times before installing a liner over it.

Good luck, Dennis