+ Reply to Thread
Results 1 to 7 of 7

Thread: new valve stiff and clicks/ air in returns

Hybrid View

  1. #1
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: new valve stiff and clicks/ air in returns

    Probably need to send or post pics, if you want more from us.

    Good luck.

  2. #2
    TomC is offline PF Supporter Thread Analyst TomC 0
    Join Date
    Dec 1969
    Location
    New York
    Posts
    96

    Default Re: new valve stiff and clicks/ air in returns

    As easy thing to try is tightening the drain plugs on the pump. These were loose on mine and it drove me crazy until someone on this forum told me about them. I didn't even know they existed. Anyway on my pump there are two drain plugs, on the left side of the pump as you are looking at it head on. They have little o-rings in them, and they just tighten by hand. My pump brand is Pentair, your arrangement may be slightly different, but in general they are on the side of the pump, towards the bottom. Just one more easy thing to try. Good luck.

    Tom
    20'x42' L' 41K gal IG vinyl pool; trichlor feeder, bleach; Pentair 420 cartridge filter; Pentair Whisperflo 1.5hp 2 speed pump; hrs; TF-100, CYA test; city;PF:2.9

+ Reply to Thread

Similar Threads

  1. Waterco F600 top mount multiport valve sand filter - removing the valve
    By wojie24 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 10-29-2011, 10:41 PM
  2. Bubbles from my returns?
    By gilbertpsk in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 06-17-2011, 04:31 PM
  3. Jandy valve ... water getting past closed valve
    By Longgrove in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-13-2011, 01:59 PM
  4. ? about # of returns needed
    By LBD in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 07-27-2006, 12:20 PM
  5. Returns
    By crosso in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-01-2006, 05:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts