Newbie from NKY

[Watermom]

You are welcome. Let us know if you have further questions and we'll try and help.

[BigDave]

Unsolicited advice #1:
If you end up being able to fit either the round or the oval - I suggest the round, they're cheaper and mechanically simpler - the verticals and buttresses on the sides of an oval have to provide significant resistance to the water. Plus you can make a whirlpool in a round pool by everybody walking / swimming around until the water's flowing round and round - Fun.

Unsolicited advice #2:
Get and learn to use the K-2006 before your pool's installed. In my opinion, it is the single most imnportant start-up chemical for a pool, next is water.

[snuhjr]

Thank you for the advice Big Dave. I have read lots about using the proper test kits and not relying on test strips for accurate measurements. Believe me, that is the first thing I will purchase. I am leaning towards a round pool over an oval one for a few reasons. (mainly cost) Of course, our yard appears to be better shaped for an oval. I will keep everyone posted. Thank you!

[PoolDoc]

membership upgraded. -ben

[CarlD]

Pretty much all of us agree on the test kit. It will be the most cost-effective expense you ever make on your pool.

I disagree on the round vs oval pool as I like to swim laps and you can do that in an oval pool but you need an AMAZINGLY big round pool to be able to swim laps. An 18x33' oval with 4' of water holds about 13-15000 gallons, but a 33' round pool holds 25-26,000 gallons---and it is FAR HARDER to vacuum the center of a pool with a 15-17' radius!

Plus it takes up more space in your yard. A well-built and properly constructed oval can easily stand for 20 years.

Just IMHO.

Carl

[snuhjr]

Here are a few picks of my backyard canvas for the pool. The deck you see is 24' wide for your reference. I think you can see why an oval might fit better. I know we are gonna have a nice dig because of the slope.