Re: Should inground vinyl liner be flat against pool side?
I have a similar situation with my above-ground liner pool.
On one of the long sides of the oval above the water line the liner is not flat against the wall. It appears that the installers did not suck out all the air when they installed the liner. It's been like this for 7 years without problems.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Re: Should inground vinyl liner be flat against pool side?
From my post above:
That is incorrect and a complete misunderstanding on my part with regard to why they use vacuum suction during installation. In my particular case it likely is an ill-fitting liner.Originally Posted by AnnaK
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Posting Permissions
Reply With Quote
Bookmarks