Jandy AquaPure 1400 trouble shooting help

[kelemvor]

I would try contacting Jandy (zodiac) support. http://www.zodiacpoolsystems.com/Support.aspx

According to the manual, those two error codes indicate:

180 - Heated sensor element not heating (also generates 172 code)
172 – Flow sensor service - clean sensor, check for damage and replace if necessary.

[keastman]

little late on this post but from what I understand, jandy has come up with a inline circuit board to add to the terminal end of the sensor cable that is supposed to boost the signal form the trisensor. It supposedly has corrected a lot of the sensor error codes. I've been through at least 4 sensors with mine. One came dead from the factory. Being a premium priced SWG system, you'd think they'd have a premium product. I wouldn't still own mine had I not been able to find parts on Ebay and other sources. My cell is going bad now and I'm likely going to go with another brand.