+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 33

Thread: Do you have your filter on a timer?

  1. #1
    Join Date
    Jul 2012
    Location
    New England
    Posts
    6

    Default Do you have your filter on a timer?

    I don't have a pool yet. I'm in the process of researching an 18 foot round above ground pool. My husband and I are wondering how long a filter needs to be run in the summer. While we were doing research in the local pool store today, we heard a few customers mention that they have their pool filters on a timer. Do most people put the filter on a timer? If so, how long is it set for? Or is it better to run it 24 hours?
    Thanks! This is a great forum.

  2. #2
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Do you have your filter on a timer?

    I don't have mine on a timer, because of the tendency around here for evaporation to take the water level too low. During swim season, I turn it on in the morning when I get up, and off when I get ready to go to bed, so it runs somewhere around 12 hours. During the winter I run it overnight when the air temps are below freezing, but otherwise just 2-3 hours a day to circulate chlorine when I need to add it (my pool never closes).

    When clearing up an algae bloom or other water problem, the filter needs to be run pretty much 24/7, but otherwise it only really needs to run enough to turn over your pool's water volume once a day--for most pumps/filters, 6 or so hours a day is plenty.
    Janet

  3. #3
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Do you have your filter on a timer?

    I don't currently, but many summers we do put our pump on a timer to kick on around noon and off around 8pm.

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Do you have your filter on a timer?

    Quote Originally Posted by aylad View Post
    (my pool never closes).
    Hear that people? Pool party's at Jan's house this winter!

  5. #5
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Do you have your filter on a timer?

    If you can stand it--go for it!

  6. #6
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Do you have your filter on a timer?

    Quote Originally Posted by momofonly View Post
    I don't have a pool yet. I'm in the process of researching an 18 foot round above ground pool. My husband and I are wondering how long a filter needs to be run in the summer. While we were doing research in the local pool store today, we heard a few customers mention that they have their pool filters on a timer. Do most people put the filter on a timer? If so, how long is it set for? Or is it better to run it 24 hours?
    Thanks! This is a great forum.
    I use a timer and wouldn't want to do without one; one less thing to have to remember. During the season I run it about 14 hours a day; I find this is long enough to keep the pool clean and allow the SWCG enough time to maintain chlorine levels (note that I have a 20k gal IG pool).
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  7. #7
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    526

    Default Re: Do you have your filter on a timer?

    Intermatic timer. I run 7-11pm and then 7-12am ...
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

  8. #8
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: Do you have your filter on a timer?

    Intermatic timer hardwired into my breaker box. Runs from 10 PM to 4 AM each night because the rates are 50% less. I have a 2 speed pump and run it on low speed which means it takes just 1/4 or so of the electrical power. I cannot tell in the summers that my pool pump is added to the load because the A/C uses ever so much more power. I run the pump on low speed for an hour or so after a swim session to skim the dog hair off the surface. The timer has definitely improved my life. I don't have to remember to do yet another thing
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  9. #9
    Join Date
    Jul 2011
    Location
    Boca Raton, FL
    Posts
    126

    Default Re: Do you have your filter on a timer?

    Our pool builder didn't even offer a pool without a timer -- it's just assumed that the homeowner would want to use a timer, and I see why -- it's just one less thing to remember, one less thing to do. Ours runs 8 hrs a day, all months of the year (I'll run the filtration system if we're swimming after 4pm when the timer shuts off the pump). I'm experimenting with how low I can run the variable speed pump and still maintain crystal clear water. Last summer I ran the pump @ 2750rpms. I started this summer running it at 2000 rpms, and just now dropped it to 1800 rpms. I probably won't go lower than 1800 rpms, as that's running the pump at about half-speed.
    South Florida - 16,000g Diamond Brite pool, 700g spa & waterfall, Jandy 1400 AquaPure SWCG, Jandy variable-speed 1.5H pump, Jandy 60 DE filter, Jandy heat pump - using Taylor K-2006 kit

  10. #10
    Join Date
    Jul 2012
    Location
    Cincinnati, OH
    Posts
    26

    Default Re: Do you have your filter on a timer?

    I run my filter 24/7 is this bad?
    18x40 Lazy L 30K gal IG Vinyl pool; tri-clor feeder; Hayward #250 sand sand filter; Hayward super-1-1/2 HP pump; ; Taylor 2006c; utility water- PF:4

+ Reply to Thread

Similar Threads

  1. broken timer for pool filter
    By vinouspleasure in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-27-2012, 03:17 PM
  2. Can i put a timer on my pump/filter?
    By CelticDaddio in forum In-Ground Pool Construction and Repair
    Replies: 8
    Last Post: 06-20-2007, 07:39 AM
  3. Timer
    By jrv331 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 06-11-2007, 01:04 PM
  4. Timer on pump/filter
    By VOLDADDY in forum Pool Equipment & Operations
    Replies: 5
    Last Post: 04-06-2007, 07:00 AM
  5. First Timer
    By Pinman24 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 04-04-2006, 11:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts