+ Reply to Thread
Results 1 to 6 of 6

Thread: Unfortunate experience with Aquabot repair

  1. #1
    TomC is offline PF Supporter Thread Analyst TomC 0
    Join Date
    Dec 1969
    Location
    New York
    Posts
    96

    Default Unfortunate experience with Aquabot repair

    About a month ago my Aquabot Turbo RC, which is about 11 years old, stopped working. Because neither of the two motors were running, I thought the problem resided in the power supply. I called the repair shop, about 40 miles away from my home, and brought in the power supply and the Aquabot. They tested the Aquabot and the power supply, said the problem was the timer on the power supply. They bypassed the timer and called me to pick it up. When I got it home, the Aquabot would not run, neither of the motors were getting power it seemed. So I called them back, and brought the Aquabot and it's power supply back to them. They said they'd make this repair a priority.

    2 weeks later I called them. I was informed that both motors were bad and needed replacing, at a cost of over $600.
    So i told thenm not to repair it, and I bought a new unit. When I went to pick up my non-repaired unit they couldn't find it, and I was told I'd get a call later. Once I got home a message was waiting for me that they re-diagnosed the unit, and all it needed was a tune-up, which involves replacing belts and brushes and tracks, for a cost of about $250.

    I actually replace these parts every few years myself, and I failed to see how they could prevent the motors from even turning on. So I called back and explained that I didn't think that was the problem, as the motors just don't seem to be getting any juice. I asked them not to repair it, and that I'd be right down to pick it up.

    Once I got there, they told me the actual problem was the plug that went from the aquabot to the transformer. They told me it would be a $150 repair. I said thanks but no thanks, paid their diagnostic fee and went home. I purchased the connector online for $45, and spent 20 minutes repairing it myself. It works fine now.

    Had I let them the repair the motors and the belts, I would have spent over $800 on this unit, and it STILL would not have worked. Troubleshooting these things just isn't that hard, and I'm disappointed in the way this company handled the whole affair. Live and learn.

    Tom
    20'x42' L' 41K gal IG vinyl pool; trichlor feeder, bleach; Pentair 420 cartridge filter; Pentair Whisperflo 1.5hp 2 speed pump; hrs; TF-100, CYA test; city;PF:2.9

  2. #2
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Unfortunate experience with Aquabot repair

    That whole experience would make me NOT use them for any repairs at all! Were you able to return the new unit you bought?

    Janet

  3. #3
    TomC is offline PF Supporter Thread Analyst TomC 0
    Join Date
    Dec 1969
    Location
    New York
    Posts
    96

    Default Re: Unfortunate experience with Aquabot repair

    Actually Janet, the new unit moves so much faster and does such a great job on the pool, I think I'll keep it and sell the old one on ebay or craigslist. And that company will never get any more business from me.

    Tom
    20'x42' L' 41K gal IG vinyl pool; trichlor feeder, bleach; Pentair 420 cartridge filter; Pentair Whisperflo 1.5hp 2 speed pump; hrs; TF-100, CYA test; city;PF:2.9

  4. #4
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Unfortunate experience with Aquabot repair

    I don't blame you a bit!

    Janet

  5. #5
    Join Date
    Jul 2010
    Location
    Midwest
    Posts
    36

    Default Re: Unfortunate experience with Aquabot repair

    What kind is your new unit?

  6. #6
    TomC is offline PF Supporter Thread Analyst TomC 0
    Join Date
    Dec 1969
    Location
    New York
    Posts
    96

    Default Re: Unfortunate experience with Aquabot repair

    I bought an aquabot viva. It's really a great robotic cleaner, with a good warranty.

    Tom
    20'x42' L' 41K gal IG vinyl pool; trichlor feeder, bleach; Pentair 420 cartridge filter; Pentair Whisperflo 1.5hp 2 speed pump; hrs; TF-100, CYA test; city;PF:2.9

+ Reply to Thread

Similar Threads

  1. aquabot vs aquabot turbo
    By tileguy88 in forum Pool Cleaning: Manual or Automatic
    Replies: 1
    Last Post: 07-12-2011, 02:57 PM
  2. Anyone ever repair power cord for Aquabot Turbo T?
    By LizT111 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2011, 04:03 PM
  3. Aquabot Junior vs. Aquabot (regular) Pool CLeaner for in-ground pool
    By PhillySportsTC in forum Pool Cleaning: Manual or Automatic
    Replies: 1
    Last Post: 04-07-2011, 10:57 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts