New User, New Pool owner in Canada. QUESTIONS! ;)

[v1rotate]

Thanks!

[Poolsean]

If it's a DIG-220 control panel, you can safely go to any size cell without any other modifications. The SC36 and RC5 cells are the same. Also, there are new part numbers for all the cells. RC5=SC36=RC35/22; SC48=RC42; SC60=RC52.
Once replaced, go into the installer menu and adjust the CELL TYPE to match the same model cell that you replace it with. Dont forget to replace the cell cord at the same time.

[PoolDoc]

membership upgraded. -ben

[v1rotate]

Thanks very much!

Since this post, I tested for phosphates, they were high, so I had those taken out with Phosfree. I then added 2KG of powerchlor to shock the pool, as recommended by local pool store.

Warnings went away, chlorine level came up.

I set chlorinator to 60%, within one week chlorine was gone out of the pool... with warnings back on.

I assume the issue is a new cell is needed

[Poolsean]

Sounds like it. When you go to TEST POOL PILOT, what does it show for Cell Amps and Volts?