+ Reply to Thread
Results 1 to 8 of 8

Thread: SWG Cell install opinions/suggestions requested.

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Severn, MD
    Posts
    48

    Default Re: SWG Cell install opinions/suggestions requested.

    Thanks for your opinions, I appreciate it. I will see what I can do about getting some measurements for you Pat. Anyone else?


    Regards,

    Mark


    EDIT: Here's an updated picture. Thanks again. I hope it isn't too congested now.
    Attached Images
    Last edited by Beautye350; 05-30-2006 at 07:22 PM.

  2. #2
    SJohnson is offline Registered+ Thread Analyst SJohnson 0
    Join Date
    Mar 2006
    Location
    Charleston, SC
    Posts
    53

    Default Re: SWG Cell install opinions/suggestions requested.

    Man, that's a giant pool!! If I were you, I'd just put two cells on it . . . one on each filter. Less use of one cell and that way you know you'll get the chlorine production you need and won't have to worry about cell life as much, and also, you won't have to run one filter longer than the other. I just think, with that size pool, two would be the way to go. AquaLogic? I think they'd advise 2 as well . . . What is your gallonage?

    SJ

  3. #3
    Join Date
    Dec 1969
    Location
    Severn, MD
    Posts
    48

    Default Re: SWG Cell install opinions/suggestions requested.

    I wasn't aware I could run 2 cells off of one aqualogic. I'll have to go back and read the manual more thoroughly.

    By my calculations I am just shy of 38,000 gallons. The pool store who worked with the previous owner of the pool said 40K.

    Interesting option if I can run 2, thanks!


    Regards,

    Mark

+ Reply to Thread

Similar Threads

  1. AutoPilot Dig 220 Low Amps-Cell?/Check Clean Cell
    By tthurman in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 3
    Last Post: 06-01-2014, 07:41 PM
  2. New T-CELL-15 reading lower salt than 7 year old cell
    By sharknj in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 07-01-2013, 09:00 AM
  3. Help needed in replumbing a new AquaPure style 3 port cell into old 2 port cell space
    By Anonymous European in the US in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 11-27-2012, 12:06 PM
  4. Pool Details (as requested)
    By Cybergy in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 8
    Last Post: 06-24-2012, 11:13 AM
  5. Feedback on my test numbers requested
    By portlandpool in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 05-05-2006, 09:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts