Your numbers don't look bad except you need to get some chlorine in there. Since your CYA is also low, you may want to use dichlor for a short time as it will add CYA and chlorine at the same time. If you prefer to just use bleach, you can just add some CYA separately. You'll want a CYA reading of 40-50. Your pH is ok at 7.2 but if it goes any lower, you'll want to use some 20 Mule Team Borax to bump it up. Keep pH between 7.2-7.8. Alk and CH are fine.
Take a look at this thread. It may be helpful for you.
http://www.poolforum.com/pf2/showthr...p-routine-care.
Bookmarks