I have been reading this forum as much as I possibly can... The wealth of information is amazing.

I have the 16" intex sand filter with SWCG generator...

I have abandoned use of the SWCG until I can get all my levels in check and balanced.

My sole source of chlorine has been from bleach.

I was using the HTH 6 way until I received my Taylor K-2006 yesterday. Boy, the reagents in the HTH must have been old. Results are much different with the Taylor kit.

I ran the tests twice to confirm the results.

Here are my numbers:

FC - 0.8
CC - .2
PH - 7.2
TA - 60
CH - 80
CYA < 30 (I expected the CYA to be low, I drained 1/3 of the water to remove the small 1 1/4 intex connectors and replace with the 1 1/2)

----------

I am looking for a recommended course of action. The water is crystal clear. I could "shock" by adding more bleach, but I believe the water is out of balance.

Thanks

Ryan