Need help before draining

[rayh78]

Got home today and my son had drained and replaced 75% of the water with new.
Still cloudy but much better. Do I need to test first. Or could you make a guess on how much bleach I could put in tonight to get started.
Plan on taking a sample to pool store tomorrow. And ordering a better test kit.

Thanks for the help.

[Watermom]

Do you have a test kit of any kind now? If so, tell us what kind it is and then post results and then order a good kit!

[rayh78]

New readings but its still cloudy. Drained 75% and added 1 gallon of 6% bleach.
Should I just keep pump running and just wait? Lower PH some?

Thanks again

Free available chlorine = 7.6
Total Chlorine= 7.6
Combined= 0
Total A = 91
Calcuium Hardness = 45
CYA = 50

[aylad]

You don't list a pH reading, so I don't know whether it needs to come down or not. Since you've been using so much stabilized chlorine, though, I doubt it needs to be lowered. Chances are it needs to be raised. Can you test for that and list your result?

The next thing I would do is to test your chlorine level tonight, after the sun is off the pool, and test it again in the morning, before the sun hits the pool. Compare those readings, and if there's more than 1 ppm difference, then you need to shock the pool, which for a CYA =50 means you need to raise the chlorine to 15-18 ppm and hold it there until the water clears up and until you can run that test overnight again without losing any chlorine. If there is less than 1 ppm difference, then you need to keep your filter running and be a little patient to allow the filter to remove any junk from the water.

Do yourself a favor and get your own test kit and test your water yourself. Pool store test results are sometimes reliable and sometimes not, but there's no real way to know until you have water problems. We highly recommend the K-2006 linked in my sig, but for now, at least go to WalMart and get either the hth 6-way drop kit or the cheapie OTO kit (uses yellow and red drops for chlorine and pH) and use that. To determine chlorine demand overnight, you have to be able to get accurate testing done at specific times, and the pool store just won't be able to do that for you.


Janet

[rayh78]

Sorry forgot to list
PH is 7.9

[aylad]

You can lower it if you want, using muriatic (please read the link in my sig before handling it) or dry acid. However, if your fill water is high in pH, then it's going to rise again anytime you top off the pool, so you may or may not decide it's worth it. I would test your fill water and see. My fill water is pH 7.8, and no matter what I do to try to lower it, my pool settles at that level, so I finally just quit trying to chase the number and let it be. You might find yourself in the same predicament.

Janet

[rayh78]

Ordered a test kit. The one I have only goes up to 5.0
Could run another sample to the pool store but think it will be about the same.
Been about 2 1/2 days now. And pool is back to being just as cloudy as when I started and before draining 75%.
I guess the mistake was not draining the rest of the way.
Added a gallon of bleach today to try and shock it more.
How long should I wait, before biting the bullet and re - draining the pool but 100% this time?
Hate to waste the water again but the weather is suppose to be overcast the next couple of day and maybe my best time so liner does not dry out. Can drain in 2 hours but take about 12 hours to refill.

Thanks