Ah! Thanks much for the link and the clarification.
Ah! Thanks much for the link and the clarification.
Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
[URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]
Oh great, I think I'm going to be sick or cry. Maybe both.This is a brand new pool/liner, approx 2 months old.
Any thoughts on what kind of patch kit to buy? Should we contact Doughboy to get one of theirs or are they pretty much all the same?
Should we patch over the spots to help strengthen the areas? Would that help? Or should we leave well enough alone?
doughboy 24x24 AG round 16,100 gal with 3.5 and 6.5 deep end. Doughboy sand filter. Doughboy 1 hp pump. Tropi-cal 75k btu heat pump.
I'd leave it alone. I've seen a lot of white spots on liners go quite awhile without causing a problem. Just because the liner is somewhat damaged in that area, it doesn't mean that it will fail right there.
And, as far as the 'all new pool' thing . . . ALL new pools have things wrong with them. Pool builders live in dread of new pool owners getting upset about this or that, and as a result, shifting into what I've always called the "toothbrush and flashlight" mode. Once pool owners get their teeth on edge, they tend to go around with a toothbrush and flashlight -- even literally, in some cases -- HUNTING for things that are wrong. And, they ALWAYS find them.
Once a new pool owner has gone into 'toothbrush' mode, a pool builder has to expect to spend his summer doing little 'do-overs' for that customer. Smart builders try VERY hard to keep their customers from ever getting into that mode.
But, the point is, there are ZERO perfectly built and installed pools out there. You didn't know that your pool was imperfect before; now you do. But, it was imperfect BEFORE you knew it, and even BEFORE you dropped the TC tabs.
It's just the way the world is. Don't cry or get sick, just because you've found out how things really are!
Yes my pool was perfect before now, lol.
I know you don't have a crystal ball, but are we looking at years or days of possible failure? I won't hold it against you I promise.just trying to pick your brain.
doughboy 24x24 AG round 16,100 gal with 3.5 and 6.5 deep end. Doughboy sand filter. Doughboy 1 hp pump. Tropi-cal 75k btu heat pump.
My guess would be, it won't impact the life of your liner. Like I said, I've seen liners with bleached out spots that were several years old. You asked if it damaged your liner; it did. But damaged doesn't mean unusable.
I cut my thumb about 15 years ago, and severed one of the nerves, 'damaging' my sense of feel on one side of the thumb. But, I continued to use the thumb, and it works quite well for most thumb-purposes. (At this point, most of the feeling has returned.)
Your liner is damaged, but not unusable.
Hey tokmom, as the resident 'liner expert' I fully agree with Ben's assessment (and also BigDave's).
To go a little further, the real sign that your liner was 'severely damaged' by the trichlor bits is if you see 'puckering' (a bleached out area with radial lines coming out of the middle). Even when they first appear, it's not necessarily a sign of imminent failure, just a reminder to start saving up for a replacement liner.
I honestly think that you'll get the standard 8 - 10 years out of your new liner
If you have any questions, please feel free to pick our brains.
Luv & Luk, Ted
Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries
Thanks, Ted.
Bookmarks