How to properly chlorinate small 12'x30" intex pool? And few other questions.

[Azmp1]

Hey all, i have small 12x30 intex pool for kids to enjoy. Thus far I've been reading up on the chemicals that I need and so far what I have is the PH+, the chlorine (granulated), algeacide plus (all three are by aquachem) and the test strips that only test free chlorine, ph and total alkalinity. All of this was given to me with the pool.

I got the PH in and the test strip,is telling me that both PH and alkalinity levels are ok, but of course the chlorine level is not.
So far the biggest question I have is how do I chlorinate this pool. The chlorine I have is granulated and it says on the bottle that I'm not suppose to dilute it before adding it the pool. However if I add if straight up it just settles on bottom and bleaches the liner... Is there a trick to this I should know about?

The pool is getting slimy after about a week (the water is still nice and clear just getting slippery on the inside, not colored at all, just feels slimy) so I really need to figure this out quick. in the mean time I will use the bleach fix, but not to sure how much to add and how often.... I believe the pool is about 1500 gallons?

Also, there is quite a bit of small debry in the pool after a week of use, that kids got in it, the pump is working and I assume it's doing it's job, but how do I get all that small crap out? Is there a small vac for these small pools or is there another trick to this?

Thanks in advance?

[Watermom]

We think that everyone needs a good test kit. Test strips are known around here as "guess strips" because they aren't reliable. The one we recommend is the Taylor K-2006 or 2006C which you can get through the test kit link in my signature below. Try and order it early in the morning while the seller listed is Amato Industries. Sometimes they sell out during the day, but usually restock overnight. Some other sellers don't sell it for as good of a price.

Since the kit is only sold online, you need something to use until you get it. Get a cheap OTO (yellow drops) / phenol test kit, or if available at YOUR Walmart (check availability), get the HTH 6-way DROPS test kit, which is compatible with the Taylor K2006. Test the pool as soon and you can, and post the results. If you get the 6-way kit, ALSO test the water you FILL the pool with, especially if it's a well, and post THOSE results as well. (The HTH is the best available kit you're likely to find locally, but it's not the K-2006. It can only provide rough measurements chlorine levels above 5 ppm, and it measures "TOTAL" hardness, rather than "CALCIUM" hardness, which is not ideal.)

Also, please fill in your pool's information in our pool chart:

Pool Chart Entry Form
Pool Chart Results

Tell us the ingredients of the granules. For now, go ahead and get some bleach in there. Until we know your CYA reading, I'm going to suggest shocking the pool up to about 12ppm. Adding a quart of regular unscented 6% bleach will add that amount of chlorine.

I don't know what kind of vacs these small pools use. Somebody else who does know will hopefully chime in about that question.

[CarlD]

I would immediately add 5 cups of bleach to your water--regular ordinary bleach (6% concentration) to get your chlorine level at least to a fighting chance of stopping the algae that's growing. Check your water 3x a day with whatever you have, tho the 6-way HTH kit from Walmart is the second best kit you can get. You'll want to keep your chlorine level between 10 and 15 for now, till the slime is gone, and till we get a full set of test numbers.

I'm guessing the actual water level is 24", not 30" which puts your pool at 1700 gallons. One quart of bleach will add 8.8 ppm (parts per million) of chlorine to it. Forget the powder for now.

Carl

[Azmp1]

Hi folks, thank you very much for the replys. I've added a quart of bleach few hours ago and just tested with my cheap-o strips. All three indicators are now within the "ok" levels with chlorine at 5ppm, PH at 7.8ppm and alkalinity at 120. I will add more bleach tonight per CarlD's suggestion, one question thought, with the chorine levels as high as 10-15ppm, will it bleach the liner or harm the pool in any other way, and also what is the acceptable level of chlorine should be before I let the kids back in the pool? The chlorine levels just go down in its own, correct?

Thanks all!

[Watermom]

Chlorine levels are based on CYA levels and unless I missed it, I don't think you posted one. Since we don't know your CYA level at this point, I think if it were my pool that I would only take the chlorine level up to 10-12ppm. At that level, it should not hurt your pool in any way. Chlorine levels drop down on their own over time. How quickly depends on how much CYA you have, what the weather is like and what your water conditions are. It won't hurt the kids to swim at that chlorine level but you might want to have them wear old swimsuits. Take a minute if you haven't already done so, and read the Best Guess Chlorine Chart in either mine or Carl's signature above. It will better explain the connection between chlorine and CYA.

If you can pick up an HTH 6-Way drops test kit at Walmart, you'll be able to test your CYA level.

[Azmp1]

ok, so yesterday i've added anther quart of bleach, tested in the few hours and the chlorine level was at around 10ppm. This mornng checked and slime is just about all gone - Yey!!!!

You guys rock.

just now i picked up the HTH-6 6way kit from Walmart, i will test both my pool water, my tap water and will post results as well as the list of all chemicals that i currently have on hand.

btw, i've filled out the PF pool Chart - entry line 239.

Thank you all!!!