+ Reply to Thread
Results 1 to 5 of 5

Thread: Above ground steps

  1. #1
    Join Date
    Jul 2012
    Location
    Massachusetts
    Posts
    1

    Default Above ground steps

    We are looking for ways to weigh down our above ground pool steps.

  2. #2
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Above ground steps

    Hi, and welcome to the forum!

    Many of our users have used bags of sand and bags of rock--and some have drilled holes in the bottom of the steps to let the water help weigh them down. Until you get some others to chime in with suggestions, you can search through the forum by logging out and using the google search linked in my sig.
    Janet

  3. #3
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: Above ground steps

    We have the wedding cake style steps and made weights from large diameter PVC pipe filled with QuickCrete and capped at both ends. There are photos in the link to "My Pool Pages" in my signature below.
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  4. #4
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Above ground steps

    I used soda bottles filled with pea gravel, then water and a tablespoon of bleach and capped full of water (cap them underwater if possible).

  5. #5
    Join Date
    Jun 2012
    Location
    St. Louis, MO
    Posts
    20

    Default Re: Above ground steps

    I used a couple of the 182 oz bleach jugs... filled them with quickrete (dry, didn't even mix it) Capped them and in they went. We intended to get them wet and let them cure out of the pool but just haven't done it yet.
    30' Vogue Vectra ABG

    27' round 17.1K gal AG vinyl pool; BBB; WaterWay 26in sand filter sand filter; WaterWay 2hp, 2 speed pump; hrs; TF100; utility water; summer: solar; winter: vinyl / water bags; ; PF:7

+ Reply to Thread

Similar Threads

  1. Whats the difference between in ground and above ground sand filters ?
    By sherriemoseley in forum Pool Equipment & Operations
    Replies: 8
    Last Post: 05-26-2012, 01:31 PM
  2. Steps for a 54" wall above ground pool?
    By Watermom in forum Above-Ground Pool Construction & Repair
    Replies: 7
    Last Post: 05-23-2012, 12:35 PM
  3. Filling our NEW AGP now, but need help with ground wire/ground field?
    By TheVanDams in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 06-23-2011, 11:38 PM
  4. Above ground pool ladder - ground had to be leveled 1' down in yard
    By lori0479 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 06-21-2011, 01:50 PM
  5. Investigating partial in-ground/on-ground pool
    By jcmjrt in forum Above-Ground Pool Construction & Repair
    Replies: 0
    Last Post: 07-23-2006, 06:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts