+ Reply to Thread
Results 1 to 6 of 6

Thread: Where to buy CYA? & acid ?

Hybrid View

  1. #1
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Where to buy CYA? & acid ?

    How many ounces of Muriatic acid to lower your pH will depend a lot on your TA--the higher the TA, the more acid it will take to drop the pH than at a lower TA. It also will depend on how low you want to drop it. With a SWCG, though, dropping your pH is going to be a continual thing, and the acid lasts a long, long time, so I would go ahead and get a gallon of it and you can go from there.

    Regarding your CYA, go with what your SWCG manual says. Each model requires a different amount, and it is designed to extend the cell life and let the unit work the most efficiently, so that's what you want to go with--and I believe the SWCG gurus on this forum say that you need to be at the high end of that range.

  2. #2
    Join Date
    Mar 2012
    Location
    Long Island, NY
    Posts
    35

    Default Re: Where to buy CYA? & acid ?

    Thanks for all the help
    20'x34' rectangle 17.9K gal IG vinyl liner over concrete wall pool; Goldline T-15 SWCG; Hayward 4280 DE filter; Hayward 3400 VSP pump; Taylor 2006C ; utility water ; Hydramatic pool cover ; PF:6.7

+ Reply to Thread

Similar Threads

  1. how much acid
    By not2high2fly in forum Testing and Adjusting Pool Water Chemistry
    Replies: 12
    Last Post: 07-28-2011, 11:47 PM
  2. Dry acid vs Muratic acid
    By jackinlv in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 07-25-2011, 12:44 PM
  3. Lowering TA with Dry Acid Or Muriatic Acid
    By CelticDaddio in forum Dealing with Alkalinity and Calcium
    Replies: 30
    Last Post: 07-05-2007, 12:54 AM
  4. Too much acid?
    By k2vell in forum Using Chlorine and Chlorinating Chemicals
    Replies: 4
    Last Post: 05-07-2006, 09:57 PM
  5. Dry acid versus muratic acid - and how to add?
    By west1745 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 05-03-2006, 12:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts