Opening Pool....Filter Builds Pressure Right Away...Is Normal?

[NullQwerty]

Hi all. I had started a new thread because this one was specific to the filter and I needed a plan of attack on how to open without the filter. I probably should have kept it as one and regret that now (sorry bbb). That thread is at http://www.poolforum.com/pf2/showthread.php?t=1803 I'll continue on there from now on.

So, the last thing I had said was that I would vacuum to waste, but quickly found out that without a waste line, that's asking for trouble (where do I put all the water...it would kill my lawn, right?).

I did start bumping and draining at a higher PSI. Ussaully at about 20-25 PSI there was little to no water flow in the pool. That's when I did it, but unfortunately it only took a 1/2 hour or so for that to happen. I went through another 25 lb bag of DE this way, and without a seperation tank and waste line, I had to come up with another plan of action...and quick.

But then I found out I was mistaken in my thinking and it is safe to add certain chemicals to the pool despite not having the pump running. So, tonight I went to the pool store and bought 5 gallons of liquid chlorine shock and poured it all around the pool (did at about 5:00 pm this evening). Also, at the suggestion of the pool store guy, I have three 3" chlorine tablets in floaters.

I also bought the acid wash to clean the filter (just for good measure). I plan to do that in the morning.

So, in the morning I'm going to retake my readings. and see where I am.

My readings prior to adding the chemicals were:
Saturation Index: -0.7
TDS: 500
CYA: 70
Tot Chlorine: 0.3
Free Chlorine: 0.3
pH: 8.2
Demand Drops: 2
Total Alkalinity: 36
Adj. Total Alk.: 15
Total Hardness: 82

bbb...Didn't know about the Live Algae factor. Most people I've talked to seem to be shocked when they I hear I've gone through 50 lbs of DE, but it's nice to know that in fact it's not actually that uncommon. Also, I hadn't heard of the finger cleaners, but I definitly will pick that up. Thx

[NullQwerty]

Ok....So, things are looking good for me as far as the pool is concerned. That being the case, I still have the filter issue which is why I'm returning to this thread.

While my filter does last much longer than before, it still builds pressure quickly. Within 2-3 hours after a complete drain and new DE added, it hits 22 PSI.

Here's the weird part. I can get the pressure to drop to acceptable levels by turning off the pump and opening the air relief valve. When I stop hearing air moving from the relief valve, I'll close it and turn the pump on. Pressure ussually drops to an acceptable level. The drop in pressure will be even more significant if I keep the pump off for a couple of hours before restarting it.

(I'm not certain if the opening the relief valve has anything to do with it or not but I've made it apart of my routine).

I repeat this as many times as I can. As long as pressure drops, I let it run. When it stops dropping after doing the above, then I do a bump and drain.

What do you guys think? Is something wrong with my filter?