Not a problem. We appreciate any help we can get.

We've adjusted it every way we can think of. We also found another line on the bottom and at the moment, are just ignoring the vertical line going up the wall (it coincides the the seam). On the previous overlap liner we replaced, the instructions said this line was the center line on the long end (33 ft.) of the pool. Since this liner had no instructions, we were using that as a guide. It didn't work out.

If the bottom line is the center of the pool (and it appears to be from taking a tape measure and measuring it), that vertical line means nothing? We didn't even notice the bottom line until today. We were focused on the vertical line since the previous liner used that as a focal point. I tried to call the pool company that I bought the liner from (on the Internet). It appears they've gone out of business. Their phones are disconnected. My email bounced back.

Anyway, if Waste (Ted) can share any tips/guidance it would be greatly appreciated whenever he gets a chance.