starting old pool

[csc138]

first, thanks, this site is really useful. Problem: inground circa 1984 sylvan 25,000 gal pool with 5 yr old sand filter just emptied, powerwashed and re-painted it. filling it now. I would like to try the BBB method but am wondering:
1. Can get a testing kit locally (Walmart, pool store) or do I need to send away for your recommendations?
2. Where can I get BB in bulk?
3. Any other recommendations?
Thanks in advance

[Watermom]

The Taylor K-2006 or 2006C is only available online. You can get one through the test kit page in my signature below. But, while you are waiting for it to arrive, get a cheap OTO (yellow drops) / phenol test kit, or if available at YOUR Walmart (check availability), get the HTH 6-way DROPS test kit, which is compatible with the Taylor K2006. Test the pool as soon and you can, and post the results. If you get the 6-way kit, ALSO test the water you FILL the pool with, especially if it's a well, and post THOSE results as well. (The HTH is the best available kit you're likely to find locally, but it's not the K-2006. It can only provide rough measurements chlorine levels above 5 ppm, and it measures "TOTAL" hardness, rather than "CALCIUM" hardness, which is not ideal.)


When you want to get BB in bulk, what specifically do you want?

It's much easier to answer your questions, when we know something about your pool. We often 'waste' the first few posts back and forth collecting information. So, please complete our new Pool Chart form -- it takes about 30 seconds, but will save much more than that.

Pool Chart Entry Form
Pool Chart Results

Welcome to the Pool Forum!

[PoolDoc]

membership upgraded. -ben