+ Reply to Thread
Results 1 to 10 of 11

Thread: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

Hybrid View

  1. #1
    Join Date
    Jun 2012
    Location
    Ohio
    Posts
    5

    Default Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    Hi...we've purchased and are installing our new pool. It is 16 x 32 x 52" deep. The pool is filling, however the long top rails are bowing in....does this straighten out as the pool fills? We're really worried because we can't find anyone with our same style pool...thanks!

    Edit by Watermom: When new members post, their post goes into a moderation queue to be approved by one of us before it appears on the forum, so you don't need to re-post. Never fear, it will appear! (I deleted your duplicate post in the queue.)

  2. #2
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Age
    58
    Posts
    1,765

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    Welcome to The Forum!

    It's normal for a little bowing of the walls to occur before the water is high enough to buttress them and push the walls back to the uprights.


    I'm assuming this is a 'slow fill' (like with a garden hose). Just make sure that the liner doesn't become dis-attached from the top as you fill.

    Please let us know how it ends up
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

  3. #3
    Join Date
    Jun 2012
    Location
    SE Texas
    Posts
    11

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    I installed the exact same pool 1 and 1/2 weeks ago. Like Waste stated above, the sides will bow in. They actually bow in a large amount and my wife and I were really worried as well. But when the pool gets to about 75%, the sides begin to move back out. Just thought I would throw in my 2 cents since I just went through the same installation.

  4. #4
    Join Date
    Jun 2012
    Location
    Ohio
    Posts
    5

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    Thanks for reply...it's coming along. Are you planning on leaving yours up year round? We're in Ohio and its not really recommended, however we see a lot of folks around here leaving their pools up.

  5. #5
    Join Date
    Jun 2012
    Location
    SE Texas
    Posts
    11

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    I live in Southeast Texas so our winters aren't very harsh. I'm planning on keeping the pool up year-round and I'll use the included cover as well. I don't really know at this point how much maintenance is supposed to continue during the off season, but I will be reading and educating myself. The cost of water and cleaning the metals out of my water is just too high to start from scratch again next year though.

    Does the low salinity water used in these pools freeze in the northern states during winter?

  6. #6
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    In Southeast Texas, you should be able to keep the pool up all year--just make sure that you have the pump running overnight during sub-freezing night temps so that your pipes don't freeze and burst. Your chlorine consumption will be substantially lower, though, when the water gets colder. I'm in Northwest Louisiana, near Shreveport, and mine stays open all year too...

    Janet

  7. #7
    Join Date
    Jun 2012
    Location
    Ohio
    Posts
    5

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    Well....we'll find out this December! ahahaha......last winter was fairly mild. But here is what a man we know has done to his pool every year: he partially drains the pool, takes a salt block and puts it in a 5 gallon bucket, pokes holes in the lid and puts it on. Then he places it in the center (he has a round bubble pool) and puts the cover on the pool. He says this keeps it from freezing solid. I think I'll ask around, but I've noticed some homes that have them up for a few years so we're going to give it a try. Next problem for me is the barn cats!!! They keep jumping up on the rail and looking into the pool.....anyone want a cat? or 12? ahaha....Thanks!

  8. #8
    Join Date
    Jun 2012
    Location
    Ohio
    Posts
    5

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    Thanks much! it is done and amazing, but ....my cement slabs are snapping in half....oh Nooooo! but, we're on a lot of shale here, so I'm praying there won't be much shifting.

  9. #9
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    membership upgraded. -ben

  10. #10
    Join Date
    Jun 2012
    Location
    Ohio
    Posts
    5

    Default Re: Intex Ultra fram 16 x 32 - HELP.....Pleeaaseee! :)

    Thanks so much...I was really worried. We put the cement pads under each U brace and started to think that they were causing a problem...but hopefully all is good. I'll check back in with you...next up Sand/Salt filter programming! ahahaha.....

+ Reply to Thread

Similar Threads

  1. 16X48 intex ultra frame
    By td51902 in forum Pool Chemistry for Intex-type Pools
    Replies: 4
    Last Post: 06-24-2014, 06:35 PM
  2. Major Difficulties with Intex Ultra Frame
    By razzarez in forum Pool Equipment & Operations
    Replies: 14
    Last Post: 06-26-2011, 12:32 PM
  3. HELP with 24 ft Intex Ultra Side Pool
    By jkoch in forum Above-Ground Pool Construction & Repair
    Replies: 1
    Last Post: 06-28-2010, 09:12 AM
  4. Who has an Intex Ultra Frame 24' pool?
    By jkoch in forum Above-Ground Pool Construction & Repair
    Replies: 16
    Last Post: 06-27-2010, 10:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts