+ Reply to Thread
Results 1 to 10 of 28

Thread: New Intex Easy Set 15' x 48" owner - first time pool guy

Hybrid View

  1. #1
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    15

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    Its high because of the initial shocking process I was taking. I'm going to work on the Alk tomorrow. Suggestions for amount of baking soda to bring it up to that 80 mark with the 3800 gal pool?

    I went in the pool today, little cold, but man it felt gooood.

  2. #2
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    Beautiful install; it looks like the picture on the Intex box!
    The gray plastic "sail" may be intended to be installed on the ladder inside the pool to prevent swimming under the ladder and getting stuck under water.
    How are you planning to add CYA?

  3. #3
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    He states in his first post that he is going to use dichlor for awhile which will give him the needed CYA. (I had to go back and reread to find that info as well because I, too, had forgotten his plan.)

    Regarding baking soda additions --- each half pound will add about 10ppm to your alk. Don't try to get to your target with one big dose. Do several small ones instead waiting a few hours between additons. I'd probably add a lb. at a time.

    Dave --- I bet you're right about the gray sail thing. Makes sense.

  4. #4
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    15

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    Thanks.

    I added a about a pound and 1/2 this morning, I'm going to test it later tonight. Went in again today, wow it was nice after doing some yard work!

  5. #5
    Join Date
    Jun 2012
    Location
    Long Island, NY
    Posts
    15

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    Tested tonight.

    TC:5
    CC:0
    PH: 7.2
    TA: 50

    Added some baking soda and borax tonight, will test again tomorrow.

    Any suggestions what to do to hold the tube up, the weight is bending the liner down a little, the stress is prob not good for long term use. - Pic below:



  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    What about putting a tall stake or shepherd's hook (like you put a hanging basket on) or something like that to drape the hose over to support it? They probably wouldn't put a picture of your setup on the cover of Better Homes and Gardens, but I think you're right that the stress can't be too good for the liner over the long haul.

  7. #7
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: New Intex Easy Set 15' x 48" owner - first time pool guy

    I had a 15' Intex for 3 years and my neighbor used it for a year after (until the mice ate it in his shed) and the connector looked like that the whole time - i think it looks worse than it is. The first year, I did prop it up with a stake for a japanese beetle trap 'cause it looked bad to me but a couple times the Kids shoved the whole pool dangerously close to the steel post so I removed it and let the hose hang.

+ Reply to Thread

Similar Threads

  1. Intex Owner 15' x 48" overwhelmed
    By ATC_NH in forum Pool Chemistry for Intex-type Pools
    Replies: 3
    Last Post: 07-13-2012, 04:49 PM
  2. New Intex 16' x 48" pool owner
    By losttree in forum Pool Chemistry for Intex-type Pools
    Replies: 9
    Last Post: 06-14-2012, 10:50 PM
  3. looking for Help with intex ultra frame pool 12 x 36 (frist time pool owner)
    By jon56048 in forum Pool Chemistry for Intex-type Pools
    Replies: 1
    Last Post: 06-13-2012, 11:00 PM
  4. replacment ladder for 48" intex easy set abp
    By 4nick8er in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 06-01-2011, 09:23 AM
  5. Easy Set Intex Pool
    By Naunnie in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 05-22-2011, 05:04 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts