New Intex Easy Set 15' x 48" owner - first time pool guy

[burmjohn]

Hi all,

First I'm a first time pool owner (soon to be, its being delivered tomorrow!). I saw a great deal on eBay and grabbed the Intex Easy Set 15' x 48" pool. Its the perfect size for my rather small yard on Long Island. I was debating for a few days on which size to get, but this seemed to be the perfect trade-off between size and space consumed in the yard.

Why did I get a pool? I've owned a home for 6 years now and this is one of the main reasons I wanted a house.... So I can have a great backyard to hang out in, bbq, party and play. In addition I have a 1 yr old daughter and my wife is off during the summers. I'd love for her to become a water rat like I was as a kid, she starts her "swimming" lessons in two weeks.

Anyways, after researching I decided to go with the intex because of the low barrier to entry. I figured if it didn't end up working out the worst case I'm out a few hundred rather then a few thousand. From what I read these pools are great starter pools and my neighbor two houses down has one as well, and loves it.

Sooooo that brings me to this forum. Luckily I found this forum and another one literally right after I placed an order from Amazon for some chemicals. I read enough within the first 2 hours of finding forums to cancel my Amazon order before they were able to ship it yesterday

I had ordered tablets, a dispenser, and a few other chemicals not knowing what I have learned in the past 24 hours.

What I did order was the following, and I'm pretty sure I'm on the right track now or almost there. Actually some of this stuff got delivered today already after i changed my order yesterday at Amazon.

1. TAYLOR K-2006 Pool Test Kit
2. INTEX Pool Easy Set Filter Cartridge Type A - I know these are crap from what I read so far... but I got a good deal on a 12 pack, and will swap, clean, throw out when needed. And I prob end up upgrading the whole system next year with one of the better sand based pumps when I catch them on sale.
3. Kem-Tek Algaecide - I was going to cancel this, but opted not to.
4. Kem-Tek Shock / Dichlor
5. Kem-Tek Chlorine Stabilizer / CYA

My "Beta" plan for the pool start-up so far is as follows and will more then likely be modified base on some help / guidance:

Based on the # of gallons 3736 I'm going to add ~46oz of 6% bleach to bring up the levels to 6 ppm over the course of filling the pool...
Test after an hour see where I am... then the next 4 days test and add the Dichlor....
After that 4th day make sure the CYA is between 30 and 40 and Chlorine is at around 4 and PH is around 7.4
Test daily, and adjust as needed.. Eventually getting up to a cya of roughly 40.

I just saw the thread that PoolDoc had put up "Super-Simple pool chemistry recipe...." - > http://www.poolforum.com/pf2/showthr...p-routine-care I may end up going that route but I was a little worried about the cya level (now that I know what that means) when using the dichlor for 7 days as noted in that thread. However, since I ordered the better test kit I should be able to keep an eye on it (although it takes up to a week to see the results of cya?)
I 100% understand the importance of keeping the FC level up in the range needed for the cya level you have as well.

Anyways any advise is appreciated, and I already saved some cash and headaches finding these great resources on the net. I have also spend a few hours reading about the BBB approach, which is essentially the route I'll be going after getting that initial start-up phase completed. I know a 15 foot pool is rather small by most standards, however I think its a great start to getting in the game.

One other question I had, since these intex pools come with that crap 1000 gph pump / cartridge system should I be running this thing 24/7? I don't have a problem doing so if needed. I do have a whole techie kind of setup at my house so I can set this up on my timer system to turn on / off multiple times throughout the day as needed too. In addition do you run your filter while you are using the pool? P.S. if there is a better pump that is not to expensive I'd be willing to jump on it. I thought I saw something about a 1500 gph pump that used the same filter system as well.

Any tips for setting this pool up? From what I read so far level ground is a must (which I have) and to spread out the pool as much as you can so there are no wrinkles.

Thanks in advance.
John

Pool: AG Intex Easy Set 15' x 48"
Pool Size: 3,736 gallons
Filter Type: Cartridge
Pump: Standard 1000 GPH

[burmjohn]

One other question I forgot to ask, is this kit comes with the Intex Pool Maintenance Kit which looks like a cheap / small vacuum. Is there a better alternative to sucking up the debris on the bottom of the pool then this? I'm not to sure how effective this is considering I think its powered by connecting to a garden hose....

[Watermom]

Sounds like you have done your homework and have a good grasp on what you are going to do to start your pool. PoolDoc wrote that sticky as an easy way for people to start their pools, and most of those people will not have done their homework as thoroughly as it appears that you have. It doesn't mean every Intex pool has to be opened and operated by that plan.

Once you get your CYA up to 40-50ppm you can switch to using a non-stabilized form of chlorine such as bleach.

Sorry but I can't answer your question about the Intex vacs.

Hope this helps and welcome to the Pool Forum!

[burmjohn]

Thanks, yeah I spent wayyyyyy to much time reading the past 24 hours, pool overload.

I was checking out this thing - > http://www.amazon.com/Skooba-Vacuum-.../dp/B001RPRXNO

Might be a better option for sucking up the junk on the bottom...

[burmjohn]

Anything else I need to do to get approved as a regular user and put this thread in the intex category for more exposure by others with experience?

Thanks
John

[Watermom]

No. It just takes time. There are currently about 31 threads that need moved. Ben is stretched pretty thin. In addition to getting the never-ending stream of registrations completed (and just as soon as he empties out this getting started section, it fills right back up), he also is busy answering posts, writing various guides such as the one he posted yesterday about intex pools, and maintaining some local pools where he lives. Plus, being a dad and a husband! So, his plate is pretty full, but never fear, he'll get your registration finished and your post moved just as soon as possible.

One other comment ----- Ben, the mods and the Pool Forum Support Team are the ones who can see this section of the forum, so the ones who have pool experience are already able to see your post here anyways!

Hope you enjoy being a part of the forum!