Closed Thread
Results 1 to 9 of 9

Thread: new IGP, can they Marcite before Screen?

  1. #1
    Join Date
    May 2006
    Posts
    39

    Default new IGP, can they Marcite before Screen?

    I am building an new IGP and the screen is one of the few things sub-contracted out by the pool GC. Pool construction has been top notch but now we have gotten to the screen enclosure part and things have halted. The pool deck has been done for weeks and the screen guy keeps pushing enclosure back. Pool company wants to Marcite and fill pool last but not sure why...can they finish the pool and then the guy can put screen up afterwards? Maybe they put ladders or something in empty pool...surely they can add screen enclosures to existing pools and they Marcite open pools so why the order of operation? Any thoughts from the pros?

  2. #2
    Join Date
    May 2006
    Location
    Sanford, FL
    Posts
    387

    Default Re: new IGP, can they Marcite before Screen?

    If you are in Florida, the building codes require a barrier around the pool to be present BEFORE adding water. So, if you don't have a fence that meets all the barrier requirements, they would be liable if a kid fell in a drowned.

    BTW - they didn't have you pay progress payments on the screen enclosure too - did they? I got my PB to agree to have me pay for the screen only once it was complete - and it is like $13K - so they have some incentive to complete.
    Completed 8/21/06
    14,000 gallon 3'-6' concrete pool with Diamond Brite
    Spa with spillway
    250K BTU gas heater (for spa)
    SWCG - Aqua Rite
    Hayward Super II Pump - Cartridge filter

    See pictures here http://www.philsimmons.com/family/ga...mages&keyword=

  3. #3
    Join Date
    May 2006
    Posts
    39

    Default Re: new IGP, can they Marcite before Screen?

    I am in FLA so the local coses would apply. I have a 6ft wooden privacy fence around the entire backyard (with 2 sections removed for heavy equipment as pool is being built) I think that would meet my local codes but worth a look. I have paid in 5 "drawls" and I have to look but judging from what remains to be paid I have paid most of the screen :-(

  4. #4
    Join Date
    May 2006
    Location
    Sanford, FL
    Posts
    387

    Default Re: new IGP, can they Marcite before Screen?

    You can look here for specifics:

    http://www.leg.state.fl.us/statutes/...atuteYear=2001

    and here:

    http://www.leg.state.fl.us/statutes/...n%2027#0515.27

    If you can meet all the issues, go to the pool builder and show them and they might fill it for you.
    Completed 8/21/06
    14,000 gallon 3'-6' concrete pool with Diamond Brite
    Spa with spillway
    250K BTU gas heater (for spa)
    SWCG - Aqua Rite
    Hayward Super II Pump - Cartridge filter

    See pictures here http://www.philsimmons.com/family/ga...mages&keyword=

  5. #5
    Join Date
    Dec 2004
    Location
    Orlando, Florida, USA.
    Posts
    177

    Default Re: new IGP, can they Marcite before Screen?

    Quote Originally Posted by mneal
    I am in FLA so the local coses would apply. I have a 6ft wooden privacy fence around the entire backyard (with 2 sections removed for heavy equipment as pool is being built) I think that would meet my local codes but worth a look. I have paid in 5 "drawls" and I have to look but judging from what remains to be paid I have paid most of the screen :-(
    I barrier only needs to be the plastic (orange) saftey fence. It should be installed by contratcor once the pool is dug and remain there until the pool is filled with water. The final fencing or screen enclosure is the last step. The fence around your property does not count. The safety fence is there to keep your kids or their friends from falling into the pool after they have been invited into your home/yard. The wood fence you have is to keep univited people out.

  6. #6
    Join Date
    May 2006
    Location
    Central Florida
    Posts
    19

    Default Re: new IGP, can they Marcite before Screen?

    Hi,
    I'm also in the Orlando area. I had the same thing happen to me but I told my Pool Builder to hold off until the screen was done and I was happy I did. My wait was only a week longer but the screws that were dropped in my pool after they were done was quite a mess. Just the thought of all the screws in you new pool and perhaps staining your new finish is enough to make me wait. I will tell you my Pool Builder was Artesian Pools (great pool) but they dropped the ball with the screen sub-contractor they use (poor job on the screen). Hope this helps!

  7. #7
    Join Date
    May 2006
    Location
    Downingtown, PA
    Posts
    192

    Default Re: new IGP, can they Marcite before Screen?

    Quote Originally Posted by mshumack
    I barrier only needs to be the plastic (orange) saftey fence. It should be installed by contratcor once the pool is dug and remain there until the pool is filled with water. The final fencing or screen enclosure is the last step. The fence around your property does not count. The safety fence is there to keep your kids or their friends from falling into the pool after they have been invited into your home/yard. The wood fence you have is to keep univited people out.

    I am in PA and have a fence that runs from the back of my house out around most of the yard and then back to the other back side of the house... so the pool is enclosed in 3/4 of my backyard. That fence was fine for insurance purposes... isn't it my problem to watch kids/people invited into my house??
    Outside of Philadelphia, PA
    18' x 40' IG - 22K gallons
    Sylvan Gunite Pool (1979)
    Plaster re-done (1997)
    48 Sq Ft Hayward D.E. Filter (2003)
    1.5 hp Hayward Super Pump (2006)

  8. #8
    Join Date
    May 2006
    Location
    Sanford, FL
    Posts
    387

    Default Re: new IGP, can they Marcite before Screen?

    I think it really depends on the local codes and laws. Here in FL, the leading cause of death for children under 5 is drowning - most in the pool at their own house. So the state passed a law requiring that a barrier be placed around the pool which met certain requirements.

    Now, I am not stating an opinion as to whether I agree or not with it - but that's just the way it is down here.
    Completed 8/21/06
    14,000 gallon 3'-6' concrete pool with Diamond Brite
    Spa with spillway
    250K BTU gas heater (for spa)
    SWCG - Aqua Rite
    Hayward Super II Pump - Cartridge filter

    See pictures here http://www.philsimmons.com/family/ga...mages&keyword=

  9. #9
    Join Date
    May 2006
    Posts
    39

    Default Re: new IGP, can they Marcite before Screen?

    Spoke to the pool GC and I guess they are going to Marcite and fill next week. I will put the 6 ft privacy fence back and screen guys will have to work took gate (took fence apart manly for digging equipment)

Closed Thread

Similar Threads

  1. Stains on New Marcite
    By Clearly in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 11
    Last Post: 05-31-2012, 06:31 PM
  2. Replace filter air relieve valve screen?
    By polyvue in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-14-2010, 04:49 AM
  3. Cost and/or advise for screen enclosure in central FL wanted
    By mshumack in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 11-08-2006, 03:33 PM
  4. Question about screen rooms in Florida.
    By Spensar in forum General Interest
    Replies: 4
    Last Post: 08-28-2006, 01:54 PM
  5. Polaris 360 Return Line Filter Screen Problem
    By ChiInSFO in forum Pool Cleaning: Manual or Automatic
    Replies: 0
    Last Post: 08-05-2006, 04:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts