Re: Intex combo sand filter SWCG question
After reading your instruction manual and looking closely at all the literature, the answer is no, there is not an "authorized" way to turn off the SWCG, it comes on when the pump does. But to be absolutely sure, recheck your housing to ensure there is NOT as separate on/off switch for the SWCG....if there is, your good to go.
Otherwise, your choices are 1.) return the unit for one that does not include the SWCG (this would be the best way and the only legal authorized way that could be recomended by any of the administrators of this site) 2.)DIY it to fix it, this of course is at your own risk and I am sure EVERYONE on this forum would recommend that it would be much better and far more safer to get the sand filter and pump combo with out the SWCG.....I insist you go this way. Now if you have a EE at your disposal........again, why bother when you can simply get the pump and filter....honestly, I would prefer separate pump and filter because sooner or later your pump WILL die......this is not $1,000 class pump equipment which can last 10+ years.....better to simply replace pump and use the filter unit you still have. So get another pump (I have one in the closet) and get ready to look good infront of everyone when the pump dies, and less than 10 minutes later you have replaced the pump and are the hero.....
Got it?
Bob E.
Intex 10' x 30" metal frame pool, Intex 2500 gph filter/pump, Intex Saltwater generator, SwimMax 11KW heater, 2 x Small Game Solar Domes.
Bookmarks