+ Reply to Thread
Results 1 to 4 of 4

Thread: Why Borax in The Skimmer?

  1. #1
    Join Date
    May 2012
    Location
    Florida
    Posts
    38

    Default Why Borax in The Skimmer?

    ive read here that borax should be added to the skimmer, but broadcasting seems to never be mentioned. im curious as to why it gets added through the skimmer and not just spread around the pool?

    also, ive read where PoolDoc says that some pools like a certain PH. mine seems to like 7.4 ive got to the point that i know 2 of my topped off level scoops ( small butter tub ) bring me right up to 7.6, but my pool falls right back to 7.4 within 24hrs and seems to want to stay there. TA has been at 110 and staying there. i assume i shouldnt try and fight the PH since 7.4 is just fine right?

    i tested my tap water and PH is 8.0 / FC is .5 or less / ALK is 30, i was wondering how much impact my tap water will have on my pool water ( now that i can properly test ) over time. i would think with a PH of 8.0 it would be bring up my PH as i need to add about 1-1.5 inches of water every 4-5 days as its lost from eveporation when it doesnt rain.

    BTW i dont think my water has ever been so sparkly! oh, and skimmer socks rock! thanks for the info folks! im ordering more skimmer socks and will order all my reagents, or anything from amazon through the site!
    18' round 7.5K gal AG vinyl pool; bleach; waterway cartridge filter; waterway pump; 12hrs; taylor k-2005 and taylor k-1515a; utility water ; summer: none; winter: none; ; PF:16

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Why Borax in The Skimmer?

    You can broadcast the borax, but that is just more trouble and through the skimmer is just fine. No reason not to make it easy on yourself. Plus, sometimes the Borax is clumpy and if you add it through the skimmer, you can see the clumps and break them up.

    A pH of 7.4 is just perfect. Don't fight it. Topping off with your tap water may increase the pH some, but with only an inch or so being added, it isn't going to affect it too much.

    Glad your water looks great! It's amazing what a little knowledge can do for your pool, isn't it?

  3. #3
    aylad's Avatar
    aylad is offline SuperMod Emeritus Burfle Ringer aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars aylad 4 stars
    Join Date
    Dec 1969
    Location
    Northwest Lousiana
    Posts
    4,757

    Default Re: Why Borax in The Skimmer?

    Borax is a lot less likely to cloud the water if you add it through the skimmer, too....

  4. #4
    Join Date
    May 2012
    Location
    Florida
    Posts
    38

    Default Re: Why Borax in The Skimmer?

    watermom - sounds good, and yeah i see the clumps break up going into the pump pre filter housing. i wont fight the PH... my pool chores just got even easier! i figure i can cut back on PH and TA testing to about once a week since they both seem so stable. im actually keeping a log of the time, date, what was tested/my results, and how much bleach was added to keep FC where i want it. keeping the log is helping me learn my pools personality!

    aylad - good point!
    18' round 7.5K gal AG vinyl pool; bleach; waterway cartridge filter; waterway pump; 12hrs; taylor k-2005 and taylor k-1515a; utility water ; summer: none; winter: none; ; PF:16

+ Reply to Thread

Similar Threads

  1. pH between 6.8 and 7.2 (ish)... how much Borax?
    By mastamoon in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 05-21-2012, 03:33 PM
  2. How to repair an IG liner leak at the skimmer interface and replace skimmer
    By ralph in forum In-Ground Pool Construction and Repair
    Replies: 0
    Last Post: 02-29-2012, 09:37 AM
  3. How to add Borax
    By smallpooldad in forum Testing and Adjusting Pool Water Chemistry
    Replies: 19
    Last Post: 09-27-2006, 12:33 PM
  4. 1/2 box of Borax added to skimmer
    By Bowlin in forum Using Chlorine and Chlorinating Chemicals
    Replies: 1
    Last Post: 05-24-2006, 09:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts