SWCG shows low flow all the time.

[Rosie700]

Thanks, I have gotten the CL and PH a lot better now. any other suggestions for me??? PS Thanks soooooooo very much for your help.

Date Chlorine PH Alkalinity hardness cyanuric acid
6/9/2012 0 7.8 300 400 water stayed clear add shock
6/10/2012 0.5 7.8 330 400 NA Added 9oz of CYA after reading add shock
6/11/2012 3 7.5 300 370 less then 30 Added 9oz of CYA after reading
6/12/2012 3 7.5 280 390 35 12 hours boost over night before readings
6/12/2012 1 7.5 NA NA NA 2 hours after adding 12.0 oz of liquid Muriatic acid
6/13/2012 1 7.2 270 350 NA next moring after adding 18.4 total oz of MA
6/13/2012 5 7.2 NA NA NA reading 1 hours after added 8oz of shock

[SafetyBob]

I initially had the same problem with my SWCG system from Intex too. Even covered and skimming all the grass, tree junk or whatever before I do cover it for the night, I find that as soon I do uncover the pool say a day or two later, I generally have enough crud in the return cover to take it off and clean it. With your small pump, this will be the most critical factor for you. Great job of figuring that out!!

Get that Taylor 2006C......it will afford you exacting test results so you can dial that pool in exactly where you want it.

Bob E.