+ Reply to Thread
Results 1 to 10 of 14

Thread: Just joined the forum

Hybrid View

  1. #1
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: Just joined the forum

    Crystal clear water is always a joy to swim in.

    I wouldn't do anything with the pH right now. Test it again after the chlorine has drifted down below 10 since the pH measurements aren't reliable when FC is >10 ppm. Are you planning on getting the Taylor K2006 test kit? It gives you better testing capabilities.

    Your CYA is high. You might want to stop using the inline chlorinator with the trichlor pucks and switch to plain bleach because you really don't want to add any more CYA. And, since your vinyl pool doesn't need any calcium, you might want to stop using cal-hypo. That probably was the reason for the cloudiness.

    Check the Best Guess chart for the level of chlorine you need to maintain at 80 ppm CYA. Test for that (chlorine) daily. Test for pH daily once the chlorine is down to 10 ppm or less and adjust, if necessary.

    Have fun swimming!
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Just joined the forum

    Hey Frazz! Welcome to the Pool Forum. Thanks for supplying all the information about your pool, but..... could you enter it into the Pool Chart. You can click on the blue link that Anna posted above and just enter your info in the correct cells in the spreadsheet. After you do so, you can click on the other blue link and see the results listed.

    Thanks!

  3. #3
    Join Date
    Aug 2006
    Location
    Lehigh Valley, PA
    Posts
    870

    Default Re: Just joined the forum

    Frazzled is on line 95 in the Chart, Watermom, entered on 06/13.
    Oval 12.5K gal AGP; Hayward 19" sand filter; Pentair Dyn 1 HP 2sp pump on timer
    [URL="http://www.ellerbach.com/Pool/"]My Pool Pages[/URL]

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Just joined the forum

    OK. Good. When I saw he had entered it all above, I thought maybe it had been put here instead of in the chart. I shoulda looked! Thanks, Anna.

  5. #5
    Join Date
    Jun 2012
    Location
    Minnesota
    Posts
    9

    Cool Re: Just joined the forum

    I promise, I did do my homework.

    K2006 will be here soon. We were out in the pool today, and my wife commented on the fact that she could tell I used "store brand" chlorine because it smells different from Clorox or the stuff I used to get at the pool store. I told her I was only doing as instructed and once the level goes down, she won't smell it at all.

    It didn't keep us from swimming for 2 hours, so it couldn't have been that big of a deal.

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Just joined the forum

    You really shouldn't be able to smell the chlorine at all. Usually when someone is smelling that chlorine smell it means they have a CC reading and actually need more chlorine to break it down. When you get the kit, post a full set of numbers and we'll have a look and see if anything needs tweaked.

    Glad you had a good day in the pool. That is what it is all about!

    (By the way -- reassure your wife that the store brand chlorine is fine. I don't think my pool has ever had anything but Walmart's generic bleach in it.)

  7. #7
    Join Date
    Jun 2012
    Location
    Minnesota
    Posts
    9

    Default Re: Just joined the forum

    Quote Originally Posted by Watermom View Post
    You really shouldn't be able to smell the chlorine at all. Usually when someone is smelling that chlorine smell it means they have a CC reading and actually need more chlorine to break it down.

    (By the way -- reassure your wife that the store brand chlorine is fine. I don't think my pool has ever had anything but Walmart's generic bleach in it.)
    I can't smell it at all...I think she's just paranoid that we're changing the way the pool is maintained. We'll be fine...

+ Reply to Thread

Similar Threads

  1. New guy just joined
    By jbg108 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 09-04-2012, 03:45 PM
  2. New to forum
    By KFollen in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 06-20-2012, 08:49 PM
  3. New to the forum
    By Richs154 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 06-19-2012, 06:18 PM
  4. Just joined -- planning new pool
    By Betty in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 05-27-2012, 09:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts