You probably can't control the pump with your current controller but you shouldn't need to either. The VF has built in timers so just use that instead. The procedure for setting the timers is in the manual.
Hey ya'll! I just ordered a Pentair IntelliFlo VF Variable Flow High Performance pool pump, and I was wondering how to upgrade my system to automate it to acoomodate the pump. Currently I have a
X10 pro wireless remote it controls my
pool and spa lights
heater
two pumps
two valve actuators
Spa blower
My outdoor 'box' is a MINI-Pak by Aquadyne
my valves are JVA2440
You probably can't control the pump with your current controller but you shouldn't need to either. The VF has built in timers so just use that instead. The procedure for setting the timers is in the manual.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Bookmarks