Planning an AG pool

[BigDave]

I like the 26" filter but 2HP pump sounds too big. 2 speed is good. Get the specifics on the pump and filter so we can know what it really is. That wouls be a good price for that pool in my area. Consider the convenience of having the SWCG plumbed in and running without having to mess around with it yourself.

[BethyM]

BigTallGuy: This is a Vinyl lined pool -- It has Resin top rails, bottom rail, and resin coated steel supports. Is that what you mean? Are you guys using them on pools with steel rails as well? It's hard for me to understand how such a low concentration of salt can be a problem but the warranty verbage sure does make me shy away from the steel rails.

BigDave: I got the specifics! As for the SWCG, I like the IC20 from ease of use and being plumbed right into the system. The hang on SWCG are less expensive, but I see myself hollerin at kids to leave it alone a lot too!

OK, Pump and Filter specs....

Manufacturer: Water Way
Pump: PM2201-6 -- 2hp 2speed pump
Filter: 522-5371-6MH -- 400lb 26" sand filter
Includes a Waterport 6 way multiport valve on top

Thoughts?? You guys are awesome! Thanks!

[BigTallGuy]

BigTallGuy: This is a Vinyl lined pool -- It has Resin top rails, bottom rail, and resin coated steel supports. Is that what you mean? Are you guys using them on pools with steel rails as well? It's hard for me to understand how such a low concentration of salt can be a problem but the warranty verbage sure does make me shy away from the steel rails.

Yes, My bad, I'm sorry. I should have used the word Traditional Vinyl Lined pool. I have mine installed on a traditional Steel Walled, Steel Rail, Steel Vertical Supports 24' AG Pool. As Waterbear stated, I have my Pump and SWCG Bonded directly into the GFCI, and after two years of operation, I have not noticed ANY rust or corrosion on the steel components of the pool or anywhere else in the system. I am in Arizona and don't have humidity/moisture problems, so I'm keeping my fingers crossed.

[BethyM]

Another question... can I buy this and use it on the traditional abg? Can it hook right up or does it require 'retrofitting'?

http://www.walmart.com/ip/19336123

[PoolDoc]

Dunno for sure, but I'd bet on "will require retro-fitting". Ask me in a month, and I'll probably know. I'm planning to set up 2 side-by-side Intex pools as test pools.

[BethyM]

Well, we're joining the club! Install will be in a couple weeks... we decided to forgo the swcg for now so i need to read all I can to get us off to a great start! Is there a 'what to do with your new pool' guide?

[aylad]

Any getting started links I should check out?

The stickies at the top of each forum--followed by all you can read from the forum and our sister site, Poolsolutions.com. The better you understand this from the beginning of your pool's life, the easier and more fun your pool will be.

[Watermom]

I would just add, go ahead and order a K-2006 or 2006C kit from the test kit page in my signature below so you'll have it from day one as you start filling the pool.

You're gonna love having a pool!

[BethyM]

I don't seem to be able to find the exact filter but he did say it's the large black 'egg' shaped one - So I assume it's the oval and not the round one.

Apparently, I'm the first person to ask for model numbers for the equipment. :-S

[PoolDoc]

He said "it's the large black 'egg' shaped one"?

Wow. Now there's a guy that knows his product! (NOT!!)