+ Reply to Thread
Results 1 to 2 of 2

Thread: Pump seal for Hayward super pump?

  1. #1
    Join Date
    Dec 2004
    Location
    .
    Posts
    18

    Default Pump seal for Hayward super pump?

    Opened pool today and my pump is leaking between the strainer basket and the motor.

    I have the parts schematic and instructions to change the seal assembly.

    Any thing else to change while I'm at it?

    Impeller?
    Difusser & gasket?
    Housing gasket?

    Any tricks to the process?

    gg

  2. #2
    Join Date
    Apr 2006
    Posts
    139

    Default Re: Pump seal for Hayward super pump?

    Replace housing gasket, diffuser gasket, water slinger and you might as well replace the strainer cover gasket. You do not need to replace the impeller unless it just looks bad (chewed up), front is seperating from the back or your pump has over heated and deformed the impeller. When tightening up the housing screws be careful not to tighten down to much or you will pull out the metal studs in the basket housing.

+ Reply to Thread

Similar Threads

  1. Hayward super pump 3/4 ?s
    By Messina1974 in forum Pool Equipment & Operations
    Replies: 7
    Last Post: 06-27-2013, 09:34 AM
  2. hayward super pump
    By lnjwink in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 06-11-2012, 02:06 PM
  3. Hayward Super Pump is Super Noisy
    By moneypitpool in forum In-Ground Pool Construction and Repair
    Replies: 6
    Last Post: 07-25-2011, 09:16 AM
  4. Hayward Super Pump - Super Hot and Shutting Off
    By CapitalBoo in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 06-18-2011, 08:32 AM
  5. Hayward Super Pump Really Hot...HELP?
    By calamtykel in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 06-14-2009, 03:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts