Not sure what was up with the chlorine test (I actually saw that number twice over two days), but now it is down to 0 ppm again. pH is still at 7.6

TA on my fill water is about the same - 180 ppm
CH is also about the same - 120 ppm

The following details are from after I refilled the pool. I have the 1" trichlor tabs that I'm using and I put three in every other day when the first three have dissolved. On the 6th I noticed the chlorine was down to 0 so I added the last 2 cups of bleach I had. I added about 1/2 lb of KemTech stabilizer on the 7th, so that makes about 1 lb so far. I also lowered my pH with one small box of baking soda (can't remember how much that was). The water was really cloudy yesterday after we were in (I noticed the KemTech had dissolved really fast because my kids swim in circles to make a whirlpool). The pool was clearer this morning, but still cloudy.

Any suggestions?
Stefanie